Recent content by paliastomi

For people who have the same setup as me, I have managed to stabilize X.M.P. - Profile 2 at Command Rate 1 on Trident X 2400 Mhz CL10 2x8gb and Trident X 2400 Mhz CL10 2x4gb kits by changing these settings in my MSI Z97 Gaming 5 Bios: EIST - Disabled Intel Turbo Boost - Enabled DRAM Timing...

Thanks to geofelt's answer and a bit of research I managed to do it, I found a review for this memory TridentX 16GB (4 x 4GB) Kit on Newegg which gave me the proper voltage, all i had to do was manually raise the DRAM voltage from 1.65V to 1.75V. I did this by enabling Memory Try It! option in...

Update: I enabled X.M.P Profile 1, set the frequency to 2133Mhz at 1.65V and it's been running stable for past 30 minutes, will update if any issues occur, looks promising tho

I was not aware, i just downloaded memtest, will update

Thank you for the reply, i am going to increase 1.65v spec to a bit higher and post an update on how it goes

I have 4x4gb at the moment and it keeps sutting down at XMP 2400Mhz/1.65

M/B: MSI Z97 Gaming 5 CPU: i5-4690K at 4.2 Ghz RAM: G.Skill Trident X 4GB (2400Mhz) x 4 running at 1600 Mhz GPU: MSI GTX 970 Gaming 4GB HDD: WD Green 1TB CPU-Z Report: The issue i came upon is that i purchased a kit of G.Skill Trident X 4GB x 2 on top of the 2 i had before which were running...