Recent content by paulod

  1. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    New psu landed today, swapped over and everything back to normal so that was the issue all along :grimacing: Even managed to retrieve my reset button during the rebuild
  2. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Tried each stick of RAM in A2 both old and new set with no joy but no restarting. Should have PSU on Thursday so will update once that lands, thanks for help so far
  3. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    No joy. Took a memory stick out and now no longer restarts, gpu fan is spinning but no display
  4. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Will do. There’s a slight twitch on the graphic card fan when it resets also
  5. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Yes I have also removed the reset connection. Sorry forgot to mention it restarts after 30 seconds repeatedly
  6. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Reconnected everything, all case fans and cpu fan spin up but nothing on graphics card.
  7. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    12.2 on that and same on PCIe
  8. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Hi checked the voltage on PWR_OK and with power off 0.01 with power on 4.67
  9. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Thanks will have a look at this later
  10. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    I had taken the psu out the case to test it and all voltages were good. Will I get different readings testing with it connected to motherboard? Sorry if this is a daft question
  11. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Finally got around to checking the power supply and on the 24 pin connector everything is fine in terms of voltage. Still no cpu fan or graphics card fan spin up on attempt to start so my thoughts now turn to maybe a motherboard issue. Any thoughts Thanks
  12. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    No lights on motherboard unfortunately I’m looking to borrow a psu to check if that’s the issue. Will also try and find my multimeter and give that a try
  13. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Update I tried starting up today and CPU fan and video card fans no longer spin up on attempt to start. Also, my USB keyboard and mouse are also not lighting up now, does this point to the PSU?
  14. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Sorry I didn’t make it clear , the button has physically been pushed into the case but isn’t depressed if that makes sense
  15. P

    Question Existing build won't POST, no error codes after previous start up problems ?

    Thanks for the replies, I can borrow a psu from work tomorrow and give that a try. Would the action of having the power switched off when in sleep mode potentially damage anything else?
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom