Recent content by Peter_161

No warranty.

MSI Raider GE66 12UHS The right screen hinge broke. How can I fix it? (It doesn't have to be pretty afterwards). See the image. In the middle, the top 3 screws are no longer attached. The bottom screw is. At the bottom, I've removed the screws and pushed the (now free) hinge downward)...

I want to access the data on this old Lacie external. I can find the proper firewire cables/adapters online. But it looks like it needs to be powered? How can I ensure I don't fry it with the wrong power source?

You're asking the right questions. The light means there's a problem with the RAM. I tried two 32GB's past week, and I've tried a new pair this week in every combination - 1 or 2 at a time and every slot. I've tried multiple monitors, cables, through the motherboard's and the graphics card's...

I should have made clear that this is a new build so I'm yet to install the GPU and the SSD isn't initialized yet. I've tried things with an without both just for kicks. I'm yet to see anything appear on the screen. SSD...

I boots up, the fans spin, and many lights. One light is the yellow one by the RAM on the motherboard. I've had 2 folks look at it that build their own desktops, and they think I've connected power properly. Specs: Power: CORSAIR HX Series, HX850, 850 Watt, 80+ Motherboard: ASUS TUF Gaming...

This is the second set of RAM I've tried and gotten the same result. Below - in my photo - you'll see the yellow light next to the RAM. The monitor stays blank. Motherboard...

Thank you so now the HD Audio is connected correctly. But my case - Phanteks (PH-ES620PTG-DBK01) Enthoo Pro 2 - doesn't seem to have a speaker cable?? So I still can't hear beeps....

I thought I was meticulous, but no beeps or screen. Step-by-step pictures at link below. All new parts. Power: CORSAIR HX Series, HX850, 850 Watt, 80+ Motherboard: ASUS TUF Gaming Z690-Plus WiFi LGA 1700 ATX Gaming CPU: Intel Core i9-12900K CPU Cooler: MSI MAG CoreLiquid C360 RAM: G.Skill...

No sound from laptop speakers or headphones. The sound settings show the meter going up and down, and pressing the 'test' button produces no sound: sound settings

Yes, it's called "Speaker (MSI Sound Tune)

Yes, HDMI and USB A and USC C work perfectly.

I did that too, per your advice. Now what?

After trying what Ivt recommends, and nothing improves, what's next?

Here's what that area looks like in 4 photos, below. I included some angled shots so you can see where the 1/8" jack is, assuming the problem spot is there? I'm lost as I don't see anything to tweak or fix. ty pic1 pic2 pic3 pic4