Recent content by phate1337

Hi Djmtec yes, they will work fine. Regards

hey. entirely possible that there is not enough power being drawn through the usb header leading to the front panel usb3 ports. this can be either the cable connecting or your mobo. only way you will find out which is by laying your hands on another mobo, case with usb 3 ports or grabbing a usb...

unfortunately not, you will be able to connect to the wifi but you will not have any internet access. regards

you will find that your psu only wants to mount one way (usually with the fan facing down). this is fine as you have a dust filter you can use a paintbrush to clean once a week and be fine. also, you really don't want the opening on the psu facing upwards as dust will settle inside of it from...

the M500 has come down a lot in price now and it will do you just fine (i use it in all of the laptops i build)

what does it do if you take off the OC on your GPU? also, 14.4 drivers are fairly poor IMO, try 13.6 if removing the overclock doesn't help. one other thing is to check you have the card set to uber mode not quiet (i know you probably already do)

press start and type in "print", select "settings" from the right hand side of the screen, you will then see the option to select "devices and printers", open it. now, right click your printer and select "printer properties". from there you should see a tab at the top that says "advanced"...

Hi Esteban The maximum speed your motherboard supports is 1333, don't worry though, buy whatever kit you can afford and if it is rated faster it will just slow down to work with your system and speed up when you put it in something more capable! Regards

Hey, I recommend you try and get your hands on a low end Kyocera desktop printer. as an engineer that has worked on many many brands of printers, scanners and photocopiers, the most reliable by far has to be Kyocera for desktop A4 Mono printers.

Hi Gripssl you need to take into factor the number of ROPs and texture units. if you can give me the exact models, i can tell you which has the highest bandwidth. Regards Adam

well i went ahead and ordered a few of the Phobya fans and will update to let you guys know noise/temps!

should be fine, especially with the upcoming release of mantle!

Hey Ty4755 not unless you are playing extremely CPU intensive games! Regards

Hey guys. planning a new build and wanted any comments on the watercooling components of my system. h440 case phoyba NB-eloop red 1600rpm alphacool st30 (push) alphacool ut60 (push/pull) EK Water Blocks EK-DDC 3.2 PWM X-RES 100 monsoon compression fittings masterklerr 3/8 ID 1/2 OD koolance...