Recent content by Phunging

Nope, they have all been solved, thanks again for your help!

Thanks for all the help guys! Turns out it was the RAM, it was just that particular Hyper X Fury 1866MHz that did not work which was kind of odd as 2400MHz RAM worked, but anyhow I picked up the HyperX Fury 1600MHz RAM and the BIOS showed up. Thanks again for all the help!!!!!!!

Oh ok so that means it doens't support 1866MHz for sure and if I get the HyperX Fury 8GB (2X4GB) 1600MHz at 1.5V, I should be fine, then?

Not yet, I haven't got the chance to get out and get some ram yet but I'm wondering whether or not to use 1600MHz memory or 1333MHz memory because the specs say that it supports 1333MHz +, and then once I go to the memory support list for my motherboard, it shows 1866 downgrade to 1600, and then...

My computer wouldn't load the URL for whatever reason so I put my build into PC Part Picker and it says that I use roughly 364W so 500W should be enough then?

Also, could it be that I don't have a big enough power supply? On the manufacturers site, the GPU says it uses 500W but elsewhere it says it uses 180W, so I'm not entirely sure. If it uses 500W, then that's probably why there no input because I don't have enough wattage.

Plus if the motherboard wasn't working, I don't think my HSF would be working either, but in this case my HSF works when I power the PC on so I don't think that the motherboard is really the problem.

I'm sure I didn't screw in the motherboard to tight, I checked it too, it's a tad bit pas snug. I think that the RAM removed and the beeping indicates that all is well except for that specific part so I think that my only problem is the RAM right now. I have not found any light indicators on...

I wasn't able to get out to get some new memory sticks but I found out from the manufacturer that the GB 78LMT-USB3 Motherboard does not support 1866MHz Memory and stated to use 1333MHz or 1066MHz Memory.

Alright, thanks, I'll go pick up the new ram stick in a bout an hour or so and see how it goes.

Oh ok

Ok, but as I have my Heatsink fan on it, would I need to get thermal compound as I need to take it off and then reseat the CPU, then put the fan back on?

Oh ok, what about the CPU or the HDD? It seems like my HDD is working but my tower isn't lighting up to show that my HDD is operating. Perhaps I don't have a big enough PSU? I should though as I have an estimated wattage of 364W. And for the RAM, should I get a DDR3 1600 as it seems like my...