Recent content by Popikaify

Just did it,made 30gb,its fat32.Downloaded and extracted the file and renamed it to msi.rom,plugged it into flash bios usb location on MB,pressed down the flash bios button for 3 seconds and its not working.

But everyone says it's not recommended to use MSI Center for BIOS update ?

The motherboard is an MSI B650 Tomahawk WiFi. On the back of my Kingston 128GB USB stick it says it supports USB 2.0, 3.0, 3.1 and 3.2 but if I try to format it I can only choose exFAT (default) or NTFS, and as far as I know it needs to be FAT32. Am i good like this or do I need new USB stick?

Thanks for trying though.I googled a lot and noticed that many people experience the exact problem = RGB flickering on GPU and not customizable with the program,Trixx doesnt detect secondary bios,fan test fails.The weird thing about this is that,people really like sapphire nitro+ card and say...

Yes,the software is also not working properly at the moment.I cannot change the color,interface sometimes looks bugged,different texts can be mashed,it doesnt even allow me to turn off rgb in Sapphire TRIXX,fan test always fails even though they're working all fine. The thing is.Ive been using...

4x Arctic P12 PWM,Cooler Thermalright Phantom Spirit 120SE ARGB and of course gpu.Most of the time SignalRGB since all of my stuff are from different brand,tried mystic light as well but prefer SignalRGB,and also Sapphire TRIXX software since SignalRGB does not support this card.

What ive tried so far : Resetted Windows 11 twice,cleared CMOS,swapped GPU BIOS ,unplugged GPU from Motherboard.All of my RGB is working normally besides GPU bar,i can use steady color and every few seconds it blinks like its bugged/glitching.Is there some other step to try to fix it or...

Its less than a year,and brand new of course.RX 7900GRE Sapphire Nitro+.Display Port,it worked perfectly until yesterday.Will try with other cables

I just reinstalled the windows,freshly installed all drivers as well

I reinstalled windows 11 after i experienced this,and i still can see 1sec flickering on my7900gre sapphire nitro+,and on top of that i also noticed that it says my fans failed the test after using "fan health check" on sapphire trixx software,even though i can hear them going very loud during...

If im playing high fps games,difference between gpu temp and gpu hotspot can go up to 30c,its usually 25.Is this normal ? Sapphire nitro+ 7900 gre,3x intake arctic p12 fans,1 arctic p12 exaust inside corsair 5000d airflow

So i have the most annoying update so far, LED Firmware for B650 Tomahawk,and they ask me to remove all JARGB_V2 cables from my motherboard for some reason.But i cannot find where the connectors are located

Yes,it says files scanned and then below files infected : 9089

Forgot to mention that logs also say no infections found

Did