Recent content by Poprin

  1. Poprin

    I constantly get BSOD with error irql_not_less_or_equal

    As Johnbl has mentioned, running all three of those memory sticks from different manufacturers is not a good idea, also it looks like they have all downclocked themselves to 1066mhz as the motherboard tries to even out the different timings. The easiest thing to do, is remove all the RAM sticks...
  2. Poprin

    is the gt 730 2gb ddr3 good for high-medium games

    You are going to struggle buddy, I would class that more as a home theatre PC card for a small step up from integrated graphics. The DDR3 on board is the killer. You need at least a GT 740 GDDR5 to get playable frame rates on modern games at low / medium settings. Ideally your starting point for...
  3. Poprin

    FX 6300 Overclock 4.0 = BSOD

  4. Poprin

    1866 mhz RAM on a motherboard that only supports 1600mhz?

    Basically all DDR3 RAM has a default 1333mhz SPD speed so it will work on any board. So yes it should work fine and will likely be running at 1333mhz, providing that board allows you to manually change the RAM speed you should be able to set it to 1600mhz at auto settings without too much issue...
  5. Poprin

    should i buy zotac gtx 970?

    Zotac have actually made some really good cards, I personally prefer EVGA but that's just because I've had a couple and I've been impressed by them. Gigabyte I have never had a card from them and been impressed, I just see them as totally average. MSI and Asus I would argue though do make the...
  6. Poprin

    FX 6300 Overclock 4.0 = BSOD

  7. Poprin

    GPU with fx6100@4.0GHz

  8. Poprin

    GPU with fx6100@4.0GHz

  9. Poprin

    10GB RAM Possible?

    You will not see an advantage running that extra 2gb module. It will be running in single channel mode and if anything is potentially going to cause more trouble than it is worth. With RAM, the rule of thumb is to run them in pairs. So either two modules, four modules, etc and to definitely run...
  10. Poprin

    I constantly get BSOD with error irql_not_less_or_equal

    That is a memory access violation error. It could be hardware or software. I would start with the simple stuff, confirm all your drivers are up-to-date. Update your BIOS to the latest version. If this does not help, I would first try downloading and running memtest from a usb stick. One pass is...
  11. Poprin

    Removing Xbox app

  12. Poprin

    Need to Know the differences between the two

    You really can't tell from just looking at PC part picker. I'm not a big fan of the site other than for reference because I feel people get blinkered by it. You need to decide which features are important to you and read some reviews. Just a quick google search...