Recent content by power2daplayer

So i have posted about this before, i had constant whea errors, and i had to give the cpu more voltage and i had to lower the core clock for it to boot. So now it wont boot at all, ive bought a new psu, tried all the ram sticks in different slots. Today i finally got a new motherboard A z170...

Ok i reinstalled the mobo and reseated the cpu, it turned on, had to set the voltage to 1.38 again tho, after a few hours i got a whea error again, might just replace the mobo now .

Well this problem has been happening since last year, i would get a whea error and my pc would not even get to the bios until mayber after a week it wouod come back on Here are my specs I7 6700k GTx 1080 FTW Asus z170-A Seasonic 650w gold 80w 32gb dominator plats Corsair 120ssd and 2 hdds...

ok i just ordered a seasonic 650w platinum, it will get here in around 5 days. I experienced more whea errors even at stock clock and 1.35v decided to set it at 1.36v now would ram overclock affect it? i have my platinum dominators at 2800mhz, xmp profile 1

oh i didnt see the bottom, i suppose thats why they sold it, having the vcore at 1.35 just to boot seems that i wont be having this one for long.

Really i tought it was the same, i guess il try to get a new cooler this week, i saw some ds15 cooler but i forgot its full name, but would that be the problem for the vcore problem?

Hey guys i bought a used i7 in august but ive finally put it together just 2 days ago. At first i would get the whea blue screen whenever i tried to install windows or tried to boot linux from us drive. (would get similar error) After almost giving up as this is my first k processor(have an i5...

yea its a dell board. so i should get same matching ram, or worst case get a new board.

the new one is this: 4gb 2rx8 pc3-12800u-11-12-B1 the one i already had is the same but instead at the end its: 11-11-B1

they are both hynix 4gb ram sticks, they are practically the same, only the new one has a different timing.

no, just not the new one, if i put the old one in it boots fine, but if i put the new one or both the pc starts but i get no signal. its a dell optiplex 3010 btw with a gtx 970 and a corsair cx500 the seller just refunded me said it was working, but lets me keep it without sending it back, i...

just bought a used ram stick, hynix 12800u 4gb 1600mhz have another exact one, the problem is when i start the pc up it does not boot up it works with the old one i had but not with the new one the fans turn on as if it was on but i get no signal on the monitor, also noticed the mouse does not...

just checked monitor is an Acer V193W its max res is 1440x900 yet i dont get the option

yea, hd 2500 lates drivers, it must be a windows error and im already on my max res

hey guys ive tried searching for this but i get no answers. so my moniotr is a 20 in i think acer monitor, when ever i turn on the pc it tells my about the optimal resolution, but when ever i set it, which is 1600x1200 it just says input not supported on the monitor. so my max res is...