Recent content by qwbenji

  1. qwbenji

    Question Monitor, Keyboard and Mouse randomly lose connection, All fans on PC still running

    This is the first system I have built, with secondhand GPU and MOBO. Specs: -GPU: EVGA GTX 970 -CPU: i7-6700 -Motherboard: ASUS ROG b250-G -RAM: 16GB (8x2) Ramaxel DDR4 -Storage: 2TB Hard Drive -PSU: ROG STRIX 650w -Display: 144hz AOC 24g2 -Case: Rotanium TG307- with 4x6w RGB fans. Monitor...
  2. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    I downloaded both of these. the setupchipset seems simple enough to use, i just ran it and it said it installed and then i restarted. but if i run it again it doesnt say that it's already installed and does the exact same thing as the first time. these drivers need updates and are apparently...
  3. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    I don't know if you'll see this, but I used an ROG 650w PSU, wiped the hdd and reinstalled windows and all drivers. the PC and GPU were working great, as they should for maybe 3 days, until the monitor started showing "no signal randomly again", sometimes during games, sometimes 5 minutes after...
  4. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    After a couple of windows updates, Everything seems to be working fine; I can run the card at 110% power draw on Afterburner and temps are reasonable at high GPU demand 60degrees at max draw (I opened up a game and putting up all settings up to max and infinite FPS CAP, as a stress test) IS...
  5. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    Yeah, I got an old 2tb disk drive that I got from the Old dell office tower i used to use for gaming. Since I made my new system... -GPU: EVGA GTX 970 -CPU: i7-6700 -Motherboard: ASUS ROG b250-G -RAM: 16GB (8x2) Ramaxel DDR4 2300 -Storage: 2TB Hard Drive -PSU: Corsair TX550 -Display: 144hz OC...
  6. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    "EVGA GeForce GTX 970 SC GAMING ACX 2.0" and the reccommended PSU is 500w, and mine is 550w. I'll try your suggestion and lower the power limit, and when I get the 650w psu I can raise it back up. thanks!
  7. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    . I thought the reason the gpu was turning off when in games was because it was overheating, but by looking at the logs of gpu-z i can see that the GPU doesnt go above 70 degrees and the GPU turns off once the power draw reaches around 140w. I guess the 550w isn't enough. I'll borrow a friends...
  8. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    Yeah it's weird but I just installed MSI afterburner and the fan started running again?? but then once I close afterburner the fan stops spinning? is the built-in fan control too passive? can i make msi afterburner run all the time?
  9. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    GPU is 970, PSU is TX550. GPU works fine when browsing or doing anything that isnt too demanding, but blackscreens in games, probably because the fans dont spin. GPU-z says that the GPU is drawing power and has all of the information, but the fan speed never goes above 0%. Do i need a better PSU?
  10. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    The thing is that the 750 wouldn't give a signal on the same system either, even though it has tiny power draw.
  11. qwbenji

    [SOLVED] Graphics card fan spins when PC is turned on, the prompty turns off and no signal ?

    This is the first system I have built, with secondhand GPU and MOBO. Specs: -GPU: EVGA GTX 970 -CPU: i7-6700 -Motherboard: ASUS ROG b250-G -RAM: 16GB (8x2) Ramaxel DDR4 -Storage: 2TB Hard Drive -PSU: Corsair CV450 -Display: 144hz OC 24g2 -Case: Rotanium TG307- with 4x6w RGB fans. I build the...
  12. qwbenji

    [SOLVED] Where does LED SW connect to?

    how do i know which hole to put + and negative/ground in? it's not indicated on the hub i dont think thanks
  13. qwbenji

    [SOLVED] Where does LED SW connect to?

    I meant LED SW not PWR SW my bad. PWR SW and reset are all hooked up