Recent content by ragemode_on

I could be wrong but I doubt the pSLC cache is an issue, as for what controller the drive is based on I am not sure, the manufacturer specifications lack information on which controller and which technology this SSD uses. I suspect a large portion of the SMART data is incorrect, as you...

I ran the benchmark a few more times, very inconsistent results, sometimes the SSD works completely normal but other times it slows down my entire PC to the point I am unable to abort the test View: https://imgur.com/a/hn3hMSZ

My apologies for an incomplete result but I have left this test on for about 20 minutes now and it has not been able to finish, I will leave it on for longer but just wanted to update on the situation View: https://imgur.com/a/1eOV4xn

I ran multiple "benchmarks" already using Victoria, you can see a speed graph and a response time grid in the first imgur embed (3rd and 4th slide). As for the DISM; tried multiple commands multiple times on both the install I'm using now and the one before with no visible difference. As...

Hello yall, I've been having this issue on my SSD for a while now but I have recently been getting fed up with trying to fix or atleast mitigating the issue. The drive in question is a Verbatim Vi550 512gb ( I believe it is DRAM-less but cannot confirm due to lack of manufacturer specifications...

yes, the bios update was successful, currently using it without problems on another system but i couldn't find anything on a dual bios on my model so far

the only way i get this motherboard to work with a graphics card is to use my old asus gt730, could it be an issue with my pcie slot and am i able to test it since the gt730 is an 8x card

checked and unfortunately found nothing

just saw this sorry, and no it's asus p8h61-m le, my bad

Have done that a few times already, just put in an older gt 730 i had laying around and it worked, i could set the primary graphics setting to PCIE without it reseting and it booted to windows normally, after that i tried my r9 270 but got no signal again and the bios setting has been reset...

I tried but nothing happened, i have noticed it saves other options normally, the only option that sets back to auto is the primary graphics option. When i set it to iGPU, it does not reset back to auto, it just boots normally to windows

I tried plugging the monitor into the gpu right before i pressed enter but didn't save it that time either. GPU is a XFX R9 270 and it has a 6pin connector and its firmly seated in. For the ram, im currently using a single stick of viper patriot ddr3 ram though i tried with other sticks that...

I just found an option to select primary graphics in bios, when i set it to pcie and save&reboot it sets it back to auto and i still only get signal on the igpu

Around 2 months ago on an old dell motherboard my gpu suddenly stopped giving out signal but worked in other systems, after trying lots of things people found helpful i gave up and thought it was the motherboard. I just got a new Asus board today and basically the same thing is happening, gpu...