Recent content by Rajesh Pandian

I have updated the BIOS successfully and cleared the CMOS. But still the faulty RAM didn't POST. Maybe the RAM from a different KIT is the problem, but not sure what's causing the damage to the RAM on the past two times. Maybe I was unlucky. I have asked the store to send me a new Kit of RAM...

After updating BIOS, just to be on a safer side if i take the CMOS battery out and start to boot up, the settings will be automatically be default right ?

No idea what kind of repair they did. Store said that they have sent the motherboard to an Gigabyte's Authorised Service Center. The BIOS that i had before the repair for F22 and after the repair was F25. I am about to update to F26

For 6 months after building the PC , on the 5th month i had this issue with ethernet disconnecting and reconnecting frequently. Plus sometimes the PC after login page would shuts the PC and restarts automatically. So the technician recommends me to update the BIOS, So i did and the issues gone...

Hi geofelt, Thanks for you response: Replaced RAM is from different kit. Yes they only replaced a single stick. But the brand, speed and model is same. Only the model number of the last two digits differ. But does this cause issue, cause i have heard that speed, brand and model should be same...

Hi Thanks for your response 1. The faulty ram stick won't POST at all. In the current working stick i ran Intel processor diagnostic tool and Memtest86, both result came as passed with no errors 2. Currently running the stick at native speed of 4800mhz. I have no clue of how to manually set...

1. No tingling sensation. I used the tester screwdriver to test NEUTRAL, GROUND and LINE of the 3 way Input socket. Only LINE current flows on the screwdriver LED 2. When i used two rams, it was on A2 and B2. Now currently using single ram and it is present in A2 3. Z690 AORUS ULTRA, BIOS...

I've been using this PC for approximately 6 months perfectly well from Jan to June. One day, it failed to POST, so I took it to the store. They diagnosed the issue as a malfunctioning RAM module, replaced it, and the PC booted up fine. It worked perfectly well for the next 6 days, but on the 7th...

1. Yes, the sales person mentioned that it supports DDR5 ram 2. Yes, i had the USB ethernet that i have used for laptop, I have tried this on my PC and there was no disconnection. As i have already sent the MB for RMA, i am using the USB ethernet port on my laptop and there is no disconnection...

Yes, after the 1 and 2 issue, I have updated my BIOS and Re-installed the windows. Then the problem didnt happen for a week or so.

SPECS: I7 13700K Gigabyte Aorus Ultra DDR5 XPG 1TB Nvme Gen4 (x3) Corsair DDR516x2 6000mhz Asus TUF OC 3070 TI Asus Strix LC 360 Coolmaster TD500 Mesh NZXT C850 Gold + APC Easy UPS 2200VA (1200 Watt) PC turns on with RAM red light on motherboard and shows a random numbers on Debug codes. No...