Recent content by Randal Davis

Comparing the H100I or any closed loop coolers to a custom cooler, is like comparing a dog to a wet dog in heat. Nasty to even do so. But more over a custom water cooler is the way to go with just about anything from the i7 1150, 2011, 2011v3 and the AMD 9500 series cpu. Putting a locsed loop...

amd over drive, is that Cata control center if it is then it is only showing that for the video cards . Now if ther eis another one that give me temps for everything, then i dont know about that one.

my temps i think are nuts, I let me PC run for a few hours last night to see what temps i would get, and let me say THEY ARE NUTS. I am running a AMD 9590 cpu, AsRock 990FX Extreme6 board, I put in my old Azza 850watt, replacing a Corsair RM1000 Watt, Corsair DDR3 Veng pro 16gb 2400mhz mem...

is this not a open thread ? plus had some issue`s with intel in the past .. so kinda getting some in put,and if i go back to intel, and this happens to me .

thank you, and Yes i am a idiot. Im not a scared to say that. and I am a NEWBE to all this tech stuff ... Plus Im a AMD Guy.

one thing i have learned after contacting Asrock for my issue. was that Prime95, does not give you a fair reading sometimes. They asked me to download SiSoftware`s Sandra, to see if in fact my board had any type of issue. I know its sounds strange. But when i was running Prime95 my self for...

Thank you for the info. Turns out that it is just HWMonitor that is reading it wrong. I contacted Asrock and they asked me to Download Sarda lite by SiSoftware. and with using that it did not give me any type of error, during the benchmarks. so im good to go. again Thank you so much for...

and the corsair link has me around 65 -70F

well from what HW monitor has on it, it is showing val at 43c (108f) min 38c (100F) max 66c (150F) and core temp has it at 14c min and 46c max with over all temp reachin round 28c. I am using the AMD 9590, they they tend to get hot. there wattage is 220watt .

and running prime95 i get this alarming info as well FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. so if anyone can make heads or tails out of it, Please let me know ...

oh i dont have any fans running on the board . everything is done with the case or the Corsair cooler. i have no fans plugged into any of the fan headers .. should i run the fan headers or leave everything as is. dont know if this makes any changes but i am running a RM 1000w power. i didnt...

ok, right now there all back down. im seeing systin at max of 93 and low of 85 cputin at max 125 and low of 102 auxtin at 144 all tmpin 104 all cpu temp max is at 115f low of 68 powers of round 75w so with your info, do i need to RMA the board back, or no biggie on the temp sensor on the...

Ok, i been playing around with Prime95 to strees my cpu and system. I am also running HW Monitor to watch temps and power. My testing has given me some wild temps . I am using the Asrock Extreme6 990FX amd board along with AMD`s 9590cpu cooled with a corsair H100i closed loop. In the Temps...