Recent content by ravikumar17jan

I have a brand new Antec BP450S and planning to buy a 4 years old Seasonic S12II-520 for almost the same price as BP450S. I have pentium g4560 asrock b250m 8 gb ram 1 Samsung 120gb 750 evo two 1TB 7200 RPM HDDs I like to ask out of the two PSUs above which to use for the system. I can use the...

How To Re-plate and Repair PCB Gold Fingers https://www.youtube.com/watch?v=ecoxUwzyc0Q This link gives the perfect solution i think but the kit mentioned in it is not available in my place(India).

Since the contact is very tiny,soldering is not possible i think. May be painting with a marker pen which releases copper instead of marker ink. Warranty claim is not possible as it is used product and i dont have invoice copy or anything to prove i am the owner and also it is very clear that...

Hello everyone, I have one of the gold contacts completely removed in my gskill ripjaws ddr3 4GB ram(9-9-9-24) 1.5v. I found that 990fx board detects the ram after bios resets or when extra ram is inserted and system suddenly restarts while working. When tested with memtest86 it is good and 4...

Hello Everyone, I recently bought Antec BP450S PSU which is a level below VP450P. I test ran it in the first day for 1 hour with the PSU fan spinning and PSU was cool. In the second day I started memtest86 and went away when I came back after 7 or 8 hours I noticed that PSU cooling fan was not...

400 Gb/s= 50 GB/s for home user? The fastest PCI-e SSD from Samsung or intel are capable of writing at around 3 GB/s and they are not cheap. Networking hardware(s) is also another bottleneck.

Hi all. I am running a Xeon E3 1245v3 inside the "cooler master CMP 250" case on a stock cooler. whether Cooler Master Hyper 212X fits in this casing? If not please recommend a good cooler that fits in this case as temp ranges between high 70's - low 80's on full load and I am in urgent need of...

I am planning to get this external enclosure from transcend (StoreJet 35U3 (USB 3.0)). Whether laptop HDs 2.5 inch ones fit in this enclosure, even if it fits it work without any problems?

Hello, My rig consists of the following: Intel Haswell Xeon 1245 v3 @ 3.4 GHz Gigabyte B85M-D3H 2 x 4 GB corsair RAM 250 GB Hitachi for OS and VMs 2 TB WD @ 7200 RPM Nvidia GT 610 2GB Cooler master thunder 450w All these assembled for running VMs on Debian Linux, Compilation and some video...