Recent content by Rayan643

  1. Rayan643

    Question PC restarts, is the cooler OK or is it something else ?

    Same bus speed, same brand, same latency, same capacity 2 stick ram. Maybe it is packed in one strip. How to understand the PSU ? I think 56-62 degree is quite normal. even in my asus laptop goes upto 71 degree but it didn't shut down. so the problem goes to PSU is sure?
  2. Rayan643

    Question PC restarts, is the cooler OK or is it something else ?

    @beyondlogic would it be a reason, as I'm manually allocating the ram for gpu it gets pressure so the ram gets excessive heat and goes for restart? How can I check the PSU is right or not?
  3. Rayan643

    Question PC restarts, is the cooler OK or is it something else ?

    Thanks for replying. Ok I'll update the bios. One thing to note, XMP profile is on and 6gb of memory is allocated manually to for the gpu work from the APU. Should I keep it auto? @Lutfij and @beyondlogic
  4. Rayan643

    Question PC restarts, is the cooler OK or is it something else ?

    @Lutfij thanks for replying. But how I can check the PSU power? It's not possible to cool down the rams with extra arrangement inside my casing. What can I do? Aready the casing has 3 120mm intake fan and 1 120mm out fan. Isn't it enough? How far ram heat goes up? BIOS version is base version...
  5. Rayan643

    Question PC restarts, is the cooler OK or is it something else ?

    Deepcool AG200 Single Tower with Ryzen7 8700G - Is this cooler OK? Few days ago, PC was taking direct restart without any blue screen at work. What will be the solution if taking AIO? Is this happening due to processor overheat or any other reason? (didn't check heat in a separate app, saw...
  6. Rayan643

    Question GPU recommendation needed for Autocad 3D design.

    Could you please make me a build? Though I have budget but it would be good of course I can save some bucks form here. I'd appreciate your help for sure. How would the issue be of taking DDR4 build over DDR5? Also what about the gen 3 or gen 4 support?
  7. Rayan643

    Question GPU recommendation needed for Autocad 3D design.

    Okay ram will be taken 32+32 = 64 gb. But bus speed? As per AMD's site this cpu's max is 5,200. So should i take higher bus than it considering the overclock? And does my motherboard support overclock?
  8. Rayan643

    Question GPU recommendation needed for Autocad 3D design.

    Do they both have nearly same performance? Which build would worth it?
  9. Rayan643

    Question GPU recommendation needed for Autocad 3D design.

    Total build budget is around $1500
  10. Rayan643

    Question GPU recommendation needed for Autocad 3D design.

    Hi, Suggest me a GPU for Autocad designing. It will be for a Building construction company where 3D modeling and animation will be done. Budget is not that an issue but then it’s around $500-600(hardly). But actually I want to how I make the choice for GPU? The autocad designer said, "3D...
  11. Rayan643

    Question 760GM-P34 (FX) Windows 10 Driver Needed

    @Lutfij & @bignastyid My problem has been fixed at some way. Using DDU, cleaned the previous installed drivers. Then, searched for chipset driver (AMD 760g). AMD's site has the win10_64bit chipset driver. After installing that I also installed AMD catalyst (win 8, coz official site doesn’t...
  12. Rayan643

    Question 760GM-P34 (FX) Windows 10 Driver Needed

    One thing to mention, i don’t have any graphics card. I want to get a good resolution using the default dedicated chip graphics memory. (After cleaning and restarting using DDU, the pic is sent)
  13. Rayan643

    Question 760GM-P34 (FX) Windows 10 Driver Needed

    I got that version using "wmic bios" in cmd. Okay I'm checking through cpu-z
  14. Rayan643

    Question 760GM-P34 (FX) Windows 10 Driver Needed

    Thanks lutfinj for replying. I downloaded them from website (.zip/.exe) and installed them normally. Bios version: 17.15 I am new to AMD. So I didn’t get things familiar as intel was to me.