Recent content by reekinek

Ah, okay then. Thanks for you support though. I reached out to the seller for a possible replacement. Once again, I appreciate your time spent on this.

Once again, nothing. That probably means something is wrong with the motherboard itself, right?

The manual says that it supports passive heatsinks, though I'll try doing what you said.

Could you specify what do you mean by fans? The CPU only has a passive cooler installed, the fans in the PSU work and I already checked connecting/disconnecting the external fans I have mentioned to no avail.

N Nope, it doesn't beep at all with all RAM out. I also tested it with one stick inserted and nothing has changed.

It was, though no pins seem to be damaged. I also swapped it for an Intel Celeron G1610T, but the same issue still occurs.

The speaker doesn't give out any beep codes/sounds at all. I also checked the manual, and pins 3-4 have a jumper on them, so it should use the inbuilt speaker by default.

I checked the manual, and I do have both BMC and onboard VGA enabled, since the jumpers are on pins 1 and 2.

Yes, the manual you've provided is the correct ones. Currently no power button is attached because I'm now testing it out. I was touching the pins you mentioned, 1 and 2, but the effect is always the same which I already described. (The connected fans spin for a brief moment before stopping) I...

Hello. I recently bought the following parts and assembled them together: Motherboard: Supermicro X9SCL-F RAM: 4x 4G DDR3 PC3-12800E 1600MHz ECC-Unbuffered UDIMM GOODRAM W-MEM1600E34GSM CPU: Intel Xeon E3-1225 3,10GHz SR00G s1155 HDD: WD 3,5" 500GB 7200rpm 16MB Cache WD5000AAK PSU: DELTA...