Recent content by Reos

It doesnt say in bios what voltage the RAM has, the only thing i could find in bios was PC-health where it says "Vcore OK" "DDR18V OK" "+3.3V OK" "+12V OK" "Normal CPU Vcore 1.27500V". It says in the manual that the motherboard supports 1.8V DDRII DIMMs so i guess that means that the default is...

I didnt think about that, thanks. I updated the bios version just a moment ago with the @bios software that came with the motherboard and i now have "Intel 965P, AWARD BIOS, Ver F12". I still have the 2 short beeps at the startup though so something else must be wrong :(

Hi i have a problem. This morning when i started my computer my screen couldnt get a signal and it sounded like the fan on the graphics card was running faster than usual. I tried booting a few times but it could not get a picture. I havent done anything inside my computer since i put it...

Im using the I/O plate that came with my motherboard. I think there already is standoffs inside the chassi (it is 6+ raised spots inside and they are as long as the standoffs i got with my motherboard so i cant use both i think), and if not i have gotten the wrong standoffs with my motherboard...

When i screw in the standoffs before the motherboard in my Antec p182 chassi the I/O plate doesnt line up. The motherboard is to high so i cant get the ports into the I/O-plate. Do i really need the standoffs?

Thermal paste on the entire surface of the heatspreader or just in a straight line in the middle? I baught a Scythe Infinity and in the instructions it says to aply thermal paste on the entire surface but on the instructions for Arctic silver 5 it says just to apply in a straight line in the...

Is there any differance with having the harddisks installed vertically or horizontally? Does it get damaged more easily in vertical position? Im asking because i am not sure in what way i should install my harddisks in my antec 182 case, there are two hd-cages, one for vertical and one for...

I found some numbers on cable lengths for the PSU: http://enthusiast.hardocp.com/article.html?art=MTMwMSwzLCxoZW50aHVzaWFzdA== Anyone knows how long the cables need to be to reach inside the Antec 182? The ATX 20+4pin cable is 20 inches (500mm) other lengths acording to the article: # 2x31.5in...

Im glad to hear that, i like Corsair. So even the CORSAIR XMS2 CL4 with 2.1V will work, or just the CORSAIR XMS2 CL5 with 1.9V? Edit: @zhaf: I will get most of the parts from datorbutiken.se but some of the prices are from prisjakt.se

It seems to be 1.9v for CORSAIR XMS2 CL5 and 2.1v for CORSAIR XMS2 CL4 :( Any recommendation on RAM?

Hmm, i didnt know that. I just assumed the RAM would work, i will try to find that information.