Recent content by Rextus

That was the first thing that came to mind, but I've had some luck with ADATA in the past and didn't want to go through RMA process :/

Hello everyone, I just bought a new SU800 512 GB SSD from ADATA as a laptop upgrade. Everything went fine for the first hour or so after installing Windows 10, but then I started getting an error message box saying Microsoft Windows is not responding. So i I decided to move it to my main rig...

If FlareX is the more expensive lineup how come it has slower speed? 2400 MHz vs 2800 MHz on the Ripjaws? Does 2400 CAS 14 latency make up for the slower speed on the FlareX vs 2800 CAS 16 on Ripjaws? I haven't been able to clock my Ripjaws one past 2666 MHz on CAS 15 at 1.35V.

Hello everyone, I was wondering what the difference between those 2 series is, besides speed (one is at 2400 and the other 2800). FlareX one is marked AMD compatible and not the Ripjaws 4. Picture: http://prnt.sc/p65c4m http://prnt.sc/p65cg4 Thanks

Update 2: after cranking the power settings in MSI afterburner, both vcore to +100mV and power limit to +12%, and downclocking to 610 MHz core and 1500 MHz memory (after the vbios update) I'm able to run heaven 4.0. Low yields https://prnt.sc/ool7pr and medium gives http://prnt.sc/ool72b. No...

Did everything you mentioned above by the letter. Flash was successful, and I restarted my PC, but problem is still there. Is there any other method I can try?

Do you have a link to AMDVBflash? So far I only found ATIflash, which I guess only works for older AMD cards.

GPU-Z screenshot: https://prnt.sc/ooblpa

Hello everyone, My friend gave me a normal looking RX 460, except he told me that it was having artifacting problems once the AMD drivers installs. Also that the previous owner before him used the card to "mine cryptos". So first thing I do is give the card a good clean and changed the thermal...

Hello moderators, Is it possible to change my username? The current one displays my real name. Wasn't something I cared back when I created my account but now it's getting annoying. Thanks in advance

Hello everyone, I recently dug out a PCI network adapter from my old hardware stache and wondered if I can get it working again in my retro high end system. The card is a Microsoft MN-730. However when I install the card, the system doesn't seem to recognize it, and the activity light on the...

@Darkbreeze you'd never know, of all the things that could break, what actually broke in my setup. I decided to buy another screen for a dual screen setup for a friend. And I thought he surely wouldn't mind me testing it after all the help I was to him. Tried the screen, worked perfectly. It...

@QwerkyPengwen BIOS updated to lastest version, and I know how to install Windows on dual drive setup so that isn't the issue either.

Test your CMOS battery and replace it if it's lower than 3 volts.

Make sure your video connections are not loose. Do you hear a beep after you turn your system on?