Recent content by RyuKyu567

Yep not a problem :) I thought it was interesting that the bracket for the block came off when I took it out of the box. On terms of the case I am about 99.9% sure that the case was just getting suffocated. I have the top removed right now and a quick grip holding the 2 sides on at the moment. I...

Hey all, I have had about a few days to work on the new custom loop and from what I have seen so far Ive got a few concerns. The photo attached is the current configuration: http://i63.tinypic.com/2rz8h0g.jpg Current Hardware: Gigabyte X399 Designare AMD Threadripper 1950x Corsair Vengeance...

- SkyNetRising From what I have seen so far, it seems that the 6 pin is more common on standard ATX boards for the exception of the Gigabyte Aorus (which doesn't require it apparently). I haven't really looked at the extended ATX or the micro ATX since I'm not going to go with either of those...

I've been doing some research in a new pc build and one particular subject I am having some difficulty finding. To start off I have decided to go with the AMD X399 motherboard, now it has been a while since I have dealt with AMD but over the years they have made a pretty significant come back...

So I figured out the issue on why the connection could not be made. After looking into all of the firewall rules and port forwarding values I stumbled on a solution on a different site. By using this cmd I was able to successfully have user connect. netsh routing ip nat add portmapping...

So after briefly messing with wireshark the first test shows that at least the signal is reaching the modem and DHCP server, however the route does not complete to the destination point shown in the figure. To give you a rough explanation on what we are looking at, the information on the...

-Network Routing- I have a very unique problem here which I believe has been narrowed down, however I could use all the help I can get. I am currently in the process of creating a dedicated server of Space Engineers and it runs perfectly on the local network. The catch is, I can not figure out...