Recent content by S_Bard

I wanna use VSR just to up the resolution to take screenshots every once in a while and then going back to regular res, works perfectly. Question is, does having VSR always on but not using it tax the computer? I know it technically is not doing much work until the point where i actually use a...

I suddenly had this error. As you can see the error seems to be within the CMOS. The issue is that i cant interact with the computer, pressing F1 or F2 does nothing. Restarting the computer takes me directly to this screen. I cant enter the BIOS to change de Date/Time from start up or from this...

Thanks, that was will work just fine. Im on an amd dedicated gpu, didn't know that. I ran a few things to debloat windows, which freed up some ram and cpu power and removed things that quite frankly were actively annoying me. I don´t know exactly what i did but i do have the list of things. Also...

What the title says. For reasons, i touched around windows and dissabled a lot of useless things. Amongst them seems i dissabled the option for rotating the display through the screen configuration menu on windows, when i try to change it it just says that the configuration could not be saved...

That was easier than expected, thank you very much. I've read that elswhere but its not named "clone mode" on my pc and thought it was something else. Does the clone mode put more strain on the gpu?

How do i connect my monitor to both of the cables, without windows thinking that i have 2 displays, and without deactivating one so i can freely switch between them. I need to connect my gpu through both HDMI and DVI and be able to freely switch . I cannot use just one, for reasons not worth...

I tried and no, i have tried many different resolutions. The problem is the Monitor/TV software/hardware being configured in a weird way for HDMI to PC. The display belives that VGA is the only option for PCs, and if you connect the PC via HDMI it does something weird and ends up looking really...

The tv is set to 60Hz, i have tried others and no change. I have tried all the pixel formats available. Im using Windows 10 Home and AMD Radeon software with drivers for the 7800 series. None of these settings change anything related to the problem.

It gives off the ilusion of being clearer, but its really not. The edges of the screen are fine, the problem is that everything has a really high contrast, the colours are a bit blinding and everything has a weird glowa round it, changing the colour, contrast, or any configuration on the...

I use a tv as a monitor an LG FLATRON M2380A, it has a VGA and an HDMI port. Untill recently i connected the motherboard and the screen via a VGA cable, it looked fine. Now i have a GPU with HDMI and DVI ports, I connected the GPU and screen via HDMI. Turns out tvs are configured in a weird way...

I have a GA-H61M-DS2 rev. 2.2 it has only 1 system fan slot, it has an 80 mm fan plugged in. That fan does not have a molex to connect to the psu. I bought 2 120mm more, one has a molex and the other is 3 pin. What do i do? Should i buy an adapter 3 pin to molex or a splitter? Maybe smting else?

I have a 300w generic itx PSU with a broken fan (one of the copper coils is burnt) for a miro atx pc. Due to the nature of the small PSU the only way to fix it is to buy a new fan and solder it on (its soldered not plugged) or change the coil (i don't know if thats even a thing). This has been...

I checked and they seemed compatible, they shared the same speeds, size, types, brand. The only diference was a slightly different model

A month and 5 days ago i installed some ram (4gb Kingston kvr13n9s8) that seemed compatible with the 4 gigs of ram that i had (4gb Kingston KVR1333D3N9/4G). It worked fine, until it didn't. My computer started crashing and bluescrening and taking forever to start up, starting from occasionally...