Recent content by samtoutcour

I have been running 2 x 16gb Team Vulcan 2400mhz 15-17-17-35 to 2933mhz 16-16-16-36 @ 1.4V for 2 years now, no issue what so ever, the system is rock solid, I've done countless numbers of aida64 stress test/benchmarks. Just sharing what I've experienced.

Use msi afterburner and rivatuner, put osd and look at the percentages if your 1070 is running at 50% and your cpu is at 95% well you do have a bottleneck, but if its the other way around, its really graphically intensive game your 1070 is at 99% and your cpu is at 35%, for instance, well you...

Does your voltage dip during benchmark, if yes your could just change the LLC to Turbo or Extreme I have this sort of Issue with the Latest Bios update for Aorus Z370 Gaming 5 motherboard ( F7 ) voltage won't stay put and diminish performance, I can't reach 5.0ghz anymore, but with the Bios (...

Ok im running some diagnostic on my cpu , it stop working so i tested my powersupply on a different system , then it worked so , then my ram , and pretty much everything , so end up with the conclusion that my mobo was dead , but for little test remaining my friend got a i7-4790k and i have a...

well sorry guys to bother you again but i did some Oc test it's not much, but enough to see some good gain Unigine Heavens want from 85.8 to 97.9 at 1080p Ultra / Extreme no AA and FireStrike 11219 to 12978 ( keep in mind it is a conservative OC ) i didn't push it over this, because i'm very...

well for your info everyone , i received the new one and everything is fine runs like a charm :)

Good i will be looking for that in a near future thank you very much

well thank you my friend i will just get a other one and see how it goes from there

idid Uninstall Trixx and remove what ever was remaining in my PC , did installed Msi Afterburner like before with my 390 and still does it , i do not have the same issues with the 390 , a well i will just ask for replacement

sure its not a Tier 1 300$ PSU but it did the job perfectly for a R9 390 which is more power hungry then the Fury so i don't know, but thx for the advice.

like i said i have already used DDU

I have already done that , uninstalling trixx and msi after burner sadly it didnt work also

Well hello everybody i've Run into some problem with my brand new R9 Fury . Installation want good i've installed the brand new drivers from Crismon 16.3 i do believe, no problem at all , run some test everything was fine. no heat problem , no flickering , no nothing until i go into saphire...

other question , what program i could use for Fan control for the R9