Recent content by samuil0000

I can only load optimized defaults, still doesnt help, nor does disabling tpm. I couldnt find intel bios guard and energy saver. I looked everywhere and disabled other stuff that I thought might be preventing it and it still doesnt boot with just manual timings but does boot with auto timings.

there is no such option

Whatever I change it doesn't let me boot, even with 1 stick installed. Setting the speed from auto to 21.33 - the speed it is automatically running at or setting the timings from auto to manual without changing them doesn't let me boot. I can change the enhancement setting to enhanced...

why not just hold ctrl?

Are you sure you are not confusing MB/s and Mb/s? It is possible that the servers you are downloading from are slow. When measuring internet speed you are automatically connected to the fastest server available to you. You can check what is using bandwidth using the task manager > processes...

I've found runs on userbenchmark that have the same motherboard, CPU and RAM (the 3200MHz pair) and is running them at 3200Mhz but on an older BIOS version, I tried downgrading to it but it, as well as the 4 latest versions but it still didn't work for all of them. I put the RAM pair in a...

I've tried enabling XMP with 1 and 2 sticks placed from both types but still the same. F14, the newest version

Whenever I try to enable XMP or overclock my CPU or RAM in BIOS I get this message: https://prnt.sc/XhmBmoRxp6Xg It doesn't matter how little I overclock, it doesn't let me boot. I've tried enabling XMP and changing speeds and timings with only 1, 2 and 4 sticks installed. When I overclock my...

On Asus's website it says that ver4.32 isn't supported, only 4.31 of that model. However you can still try one RAM stick with all slots, check if the CPU works, clear the CMOS or a different stick of RAM that is supported.

Turn on your PC and hold Ctrl while signing in to prevent MSI Afterburner from applying changes. You can release it a few seconds after seeing the desktop. Then open MSI Afterburner and your GPU will be set to default clock speeds. Also don't forget to stress test after every small change.

1000W PSU should be enough, even for some overclocking You can go for a KF instead of a K CPU, there is no performance difference, only the K has built in graphics that you can use to boot case you don't have a GPU or it fails. The CPU cooler should be good, but the better it is, the faster your...

I've now changed to an i7-9700k and everything is working, but I still don't know how my last cpu died. Also both motherboards work.

I'll do that tomorrow, but I guess it's just bad luck and I got a non-working motherboard? I don't see why the debug lights wouldn't light up at all.

Tried it with different RAMs with 1x and 2x sticks. They all work in the 2nd PC. My CPU booted in my friend's PC.

I decided to get a new motherboard (MSI B365M PRO-VH). Now the CPU and DRAM debug lights turn on and off but after the DRAM turns off, the VGA and BOOT don't turn on at all and there is no signal to the monitor. I tried with different RAM, GPU and checked the wiring. Should I just take it back...