Recent content by SamuraiMelon

I'm having some issues my subwoofer creating HF whining/crackling sounds that seem to be directly related to my GPU. i.e. whine/crackle increases when I move my mouse across my screen. I have a - PreSonus Eris Sub8 - Eris 5BT(Gen2) Studio Monitors - NZXT N7 Z790 - MSI RTX 4090 Setup in the...

Unfortunately I don't have another MB to test it in. The CPU is 2nd hand, I'm gonna try cleaning it and reseating it. Perhaps there's a residue of thermal paste from where it came from. Hopefully that'll sort it.

Thank you but unfortunately the heatsink is an intel one with the push in pins, so can't screw it too tight.

Hi, I have a Gigabyte Z370 Motherboard with 2x 8GB XPG GAMMIX D35 RAM and i5-8600 CPU. I've tried to run in 2 channel configuration but the PC will not boot no matter what slot configuration, with 2 sticks. My main concern is that it won't POST even with a single stick in slots DDR_4, DDR4_2...

I've plugged it into a laptop and no issues

Hi, I've tried both the front and rear line in ports with the exact same result. I've tried plugging the sub directly into the wall outlet and a surge strip (different strip to the PC) No audio enhancement enabled in software

- I have a 3.5mm cable going from my PC rear line out (3.5mm) (NZXT N7 Z790) to a PreSonus Eris Sub 8 unbalanced RCA. - From the Sub 8, I'm using TRS to Alesis elevate 5 mkii studio monitors. Unfortunately I'm getting a lot of buzzing and hissing through to the studio monitors, even when just...

Hi, yeah I suspected it was something to with the thermal paste. The problem is the card is still within warranty, and although I'd say this was a RMA-able thing, (because the paste hasn't lasted the stated 2 years), the retailer refuses to take it because the temperatures are within the...

Seemed to help a little. It used to only go up to about 73C, now it can go up to 77C at 90% load with the case side open. I suppose it is possible that the temperature has always been as is, I just haven't noticed it. I just find it unusual that the DLSS is throttled and the fans aren't running...

I've got the NZXT H700i case, 1 rear 120mm exhaust, 2 x 140mm top exhaust, 3 x 120mm intake on H150i AIO radiator. I've always thought perhaps they'll be an issue not in-taking enough air, but I can't set the radiator fans to work off the GPU temp through iCUE as the custom curve only...

As far as I'm aware, you're only able to control the 2 smaller fans with MSI Afterburner, the big fan will stay on auto at 60%. I'll still give it a go, cheers. EDIT// I've found out that the manual fan curve will control all 3 fans, thank you!

Hi, I have the MSI RTX 2080 Gaming X Trio, and recently when I've been playing graphically intensive games, e.g. Control, my temperature goes to 70-80 (not unexpected) but the fans stay at like 60%, the big single fan usually on goes up to 50% with the 2 smaller ones to 60%. The main problem...

Seems like the drive was at fault. Got a replacement and both ports work perfectly on all devices! Thank you for your help though guys!

The drive really works with the adaptor, reads/writes files without an issue. Phone charges at normal speeds; supercharge, quick-charge, regular 1A-2A charge. Phone reads/writes without an issue when connected to my PC with a USB cable. Considering the drive works with the adaptor to my...

The drive is exFAT formatted. Like I said, if I use a USB A--> C adaptor, my phone will recognise the drive through the USB A side, just won't recognise the drive if I plug the USB C side directly into my phone.