Recent content by sarthak.saswat.das

I mean it does mention it needs to go through the retailer for RMA. I will ship it to the retailer in that case.

Bought a used Cooler Master MWE 650 V2 (still under warranty until December 2025) along with a used ASUS RTX 2060 OC Edition. It was a solid deal, and I received the package yesterday. Initially, I noticed some weird behavior, like random blank screens a couple of times, but otherwise, the...

I currently have an MSI A320M-A Pro Max motherboard with 5 months of warranty left, paired with a Ryzen 3 3100 CPU. I've come across a good deal for an Asus ROG Strix B350-F motherboard and a Ryzen 5 1600 CPU combined for 4,000 INR (47 USD). The B350 is out of warranty, but considering the...

It is actually very tough to find the exact mobo+cpu combo to test this on. However I tested it on the multiple motherboards i could find across pc shops. I tested it on a Asus Rog strix board(Do not know the exact model), a msi board(again do not know the exact model), a 'Consistent' H110m...

I mean I did borrow another stick which is how i updated my bios in the first place. And no I am not mixing or matching sticks am using a single 16GB stick of adata ram and tried it individually on both the slots. And if u mean to say the adata ram stick is bad, then how is it that its able to...

Yes I have cleared the cmos, once before updating the bios. Additionally also did it after updating the bios. I flashed it to the latest version for my board on their website. The 'FE' version.

I was using 2x Starlite 4GB DDR4 2400mhz ram sticks. And yes I am aware it wont go past 2666mhz cuz of the processor. Even still the 3200mhz ram should boot up @2666mhz right?

Hello everyone, I recently purchased an Adata 16GB 3200MHz U-DIMM DDR4 stick (AD4U320016G22-RGN) . However, when I tried to boot my system, I received three beeps and it did not boot at all. I borrowed an 8GB DDR4 2133MHz stick and upgraded the BIOS to the latest version, but it still wouldn't...

As someone who plays most games at 80-120fps i think i kind of need Gsync. Though now that i havent had the experience since the last 3 months or so(I was on IGPU and at 60hz) just using 144hz already feels really good. But like you said I should probably get another cable. And hope the gpu died...

How much did you get it for? And what kind of a system are you building and under what budget? I am sure there are better options under almost every budget. I am also curious about what other components you are pairing it up with.

It could be your PC case. A case which doesn't have good air flow or is dusty can cause this. Though 89°c is a bit too high to be a case-only issue.

Yep both my monitor and PC are connected to the same power source i.e. my UPS. I am not able to follow what separating power and data cable means, please explain. From your answer I understand that it is a possibility that either the monitor or cable caused this failure, but what are the chances...

I had the exact same issue couple of days back when I installed my 1060(my previous gpu which was a 1050ti which died) and when I launched games they were very laggy. And the fps was less compared to 1050ti. The GPU was sitting at 20-50% usage while my CPU was at 100% all the time. I tried DDU...

So basically my (now dead) 1050ti started showing signs of dying around 4 months ago. Which is the same time around which I got a Display port cable and turned on Gsync. The issues i had at the start were display going out, crashing into a random colored screen and PC randomly restarting. Is it...

So basically my hard disk was fine up until yesterday, today when i booted up my pc it took longer than it usually does and it was also feeling super sluggish. I didnt give it much attention then, but i realized something was extremely long when i launched apex legends. First of all, it took...