Recent content by scrollop

I agree with you. With the video card in, I ran handbrake and it worked fine, then added furmark and it crashed immediately. The voltages and temps just before the crash were fine (voltages from 11.93-12.3 - without furmark 12.2-12.3, with furmark 11.99 mainly, down to 11.93). I removed the...

It didn't crash without the video card, though before I tried a fresh win 10 install on another drive it did crash when the video card was removed. I'm getting more confused.

I installed win 10 on an old 500 gb drive and ran handbrake again. It worked without a problem for an hour. I loaded up furmark simultaneously (1600x1200 test) and it crashed straight away. I videoed speedfan during this and this is the screenshot just before it cut out (this time it lasted 13...

Thank you for you ideas. I've updated the BIOS and tested the PSU with the multimeter which showed correct voltages, though apparently there's no accurate way of testing PSUs under load (I'll try to view he 12v voltage under load if possibe using software). Do you think it could be an OS...

Hello, I have a win 10 pc (h97m pro4 mobile, i7 4790, gtx 970, evga 650W P2) that started cutting out suddenly on a hot day, and since, the computer suddenly cuts out under heavy CPU load (handbrake). Found out 2 days ago that two internal drives are fried (HDD and ssd - not powering on), and...

Just upgraded the BIOS, things were working well, browsing the internet, started handbrake and the system cut out after less than a minute, rebotted to the windows login screen, cut out again, rebooted, cut out again, now back in win10. Temperatures of cores and MB and everything else is less...

Hello, Ihave a Win 10 box that crashes (mainly when performing high CPU load tasks such as handbrake conversions). The system cuts out suddenly, then reboots, then cuts out after aprox 2-3 seconds in a loop. If I leave it for a while then it seems ok until handbrake is used again. Build: H97M...