Recent content by shanedude02

Problem solved. I blame Ruckus (Maybe a bit of me too) Under the Ethernet ports config on the AP, I completely glossed over the dropdown which defaults to "Access Port". Changed it to "Trunk Port" and all good!

The bit that I think is throwing this all off is the PVID part, but i'm not too sure. On an Aruba switch with a Unifi AP, what i'd usually do is untag the port in a "management" vlan to drop the AP into there, and then tag all the VLAN's corresponding to the SSID's. This is what I'm trying to...

The 1 untagged VLAN on a port, this is exactly what I thought but the switch had me questioning myself cause it let me do 2... VLAN's PfSense side are working cause I did try what you've said with the network adapter and setting it there, drops me into the correct pool, if the port is untagged...

Okay, so I have a PfSense running, 3 VLANS 1 - Data 10 - CCTV 20 - Guest All network scopes set up with dhcp servers Port group created with all 3 vlans. Goes off to a GS110TP, into Port 8. Port 8 is Untagged VLAN 1, Tagged 10 and 20, PVID is set to 1 I have a couple of Ruckus AP's, 2 SSID's...

Hello, Recently upgraded my PC, to a MSI B650 Pro with a Ryzen 5 7600. I've got 2 GTX1070's in the rig, same as it was on my old setup, with the SLI bridge, however, in NVidia Control Panel, I don't have the option to enable SLI. Drivers up to date, need some ideas please? Yes I know SLI is...

I think it was just electrical noise... The power supply I was using is a cheap af 12v adapter. I hooked up a barrel plug to a cig lighter plug, powered it from the car no issues at all, ultimately that's where I'll be using it anyway. I don't know why but electrical noise did not pop into...

Hi Guys, Apologies if it's in the wrong section, this is the closest one I could think of. Basically, i've got a really weird issue with an arduino, a map sensor and sh1106 display. I've got a buck convertor set to 4.996v according to my multimeter feeding rhe arduino, screen and map sensor...

It's got an aerocool PSU in it. After making the post, I used a PSU from another machine, a seasonic unit, with the same intermittent posting issue. Even changed the CPU as well. Took a confirmed working ryzen 3200g from another machine, and swapped it out. The one that was originally in this...

Hello guys, I have a very odd one that's making me pull my hair out. Setup is: Asus A320M-K motherboard 8GB of RAM Ryzen 3200G M.2 SSD Pretty basic setup. It's very odd, if it posts, and boots, it's completely fine and stable. If I restart Windows, no issues, boots up completely fine. If I...

Yeah... I don't think it's even worth trying anymore. Was worth a shot, but oh well. Thank you!

I've been searching through those as well, tried various combo's of firmware versions, and different versions of mpall, no success. Thanks

If you want to access them locally, samba would probably be fine otherwise you could look at setting up something like nextcloud?

Hello, I was wondering if anyone had managed to get the Windows 10 install USBs from 2015/2016 to be writable. The ones marked "Model 1734" Previously I've had some Dell OEM USB's that I managed to reflash the firmware of using MPALL to make them writable but I've had 0 luck with the ones from...

If I cant get this card working or get another card that'll work cheaply enough, might just end up installing linux on a usb, and using the 4 sata ports on the motherboard to make a zfs pool. I would've preferred hardware raid, but cant get much done with next to no budget 🙃

Hello all, So I've decided to build a low spec home NAS thingy, and so far, it seems everything works except for one of the most important things. The RAID card. Specs are: Mobo: P8H61I-I CPU: Currently some i3 of some sort but getting a 2700K from a friend soon RAM: 4GB The RAID card I got...