Recent content by Silamon

Spec sheet lists: 1 x ATX 24-PIN (24) (goes to motherboard) 2 x EPS/ATX12V 8-PIN (4+4) (goes to cpu, aka the connection you are looking for) 4 x PCIe 8-PIN (6+2) {goes to gpu} 9 x SATA 8 x PERIPHERAL (4-PIN)

The stock cooler for 1300x required you to remove the clip on brackets to install it, it screws directly into the backplate. My friend threw those away because he did not think he would need them again. Thank you for answering the question then. I was hoping to get just the brackets without...

Well I am glad I looked up the installation for that cooler..... It still needs the brackets that I do not have.

https://www.techspot.com/review/1635-amd-wraith-coolers-compared/ The comparison for overclocking was pretty much the same there. Prism was only slightly edged out by the gammax 400 on a ryzen 2600. I don't think I would call the Gammax significantly better? EDIT: Oh, my mistake that was a...

Fair enough. Is there no way to buy just the brackets? I only see listings for the bracket and backplate. I only need the brackets to mount the prism and I don't really want to buy another cooler for it when I already have one.

I already have the 2700x stock cooler which is pretty close to the one you linked, I just need the brackets to install it.

I am planning to upgrade a friend's pc to a ryzen 2700x processor, unfortunately the stock cooler on his 1300x required removing the brackets to mount and he no longer has them. 2700x's wraith prism cooler requires those brackets, is it possible to buy just the bracket and not the backplate...

Alright, thanks for the replies.

So the 2700x would work fine in the b350 board? It would certainly not be getting overclocked.

Hello to all you wonderful folks at tom's hardware, I have a bit of a question for you all. I have a ryzen 2700x installed in an MSI x470 pro carbon motherboard. A friend of mine has a ryzen 1300x installed in an msi b350 tomahawk motherboard. I just ordered a ryzen 3600 processor to upgrade...

Alright then, it is a bit more than I had wanted to spend on one but I am sure it will be worth it in the end, especially since it is modular (hate all those cables I don't need in my case...) Thanks for the response.

I recently finished a new computer, got everything hooked up and it seemed to be working but the pc would cut off after 1-2 hours of being on, or a few minutes of running benchmark software. Tried putting the power supply from my old computer in and suddenly everything worked. So it seems the...

It is windows 7, 64 bit i think, as for reinstalling the os, can you do that without a disk? The pc didn't come with one

I want to upgrade the ram on my mother's old emachines computer because she often complains about it running very slowly. The pc is completely stock model EL1333G-01w, currently has 2gb of ram. So I have 2 questions, first of all how much would upgrading it to 4gb of ram help? She mostly only...

thanks a lot for the help, I'll go for the evga 600w, now I just have to order it when I get my next paycheck :ange: @Praise: the Windows 7 on my pc was already installed on the pc when I bought it, so I kinda doubted I would be able to use it again, didn't get an install disk with it Will...