Recent content by simmons33

Managed to find a .pdf and post from Kingston that claims the best normalized value for all 3 of those attributes is 120. I would assume without doing the math that those values would decrease from 120 down to a worst of 38 if the drive was actually having errors.. and that the real value is...

Ive been using a Kingston SSDNow V300 60GB SSD (With the 5.05 Firmware before Kingston screwed the pooch) since October 2013 and have a question regarding 3 S.M.A.R.T attributes Ive noticed both in Defraggler and Speccy recently.. Particularly the "195 On the fly ECC Uncorrectable Errors...

Just make a system image before you upgrade and make sure all your hardware has Windows 10 support. If it does, jump on in, test it out, and if you hate it, you can re image back to what you have in less than 10mins

A lot of people over on the Geforce Forums have been reporting issues of black screens after booting. My best advice would be to use 362.00 WHQL until this issue is sorted out. Make sure you clean install those drivers using your method of choice to avoid any other potential issues...

I assume you were using System Info/MSINFO to check the cards VRAM? Last I checked, that tool is still 32bit based and wont report any card over 2GB VRAM correctly. For Windows 7, make sure you run DXDIAG in 64bit

You can right click on Start, select Event Viewer, expand Application and Services logs, Microsoft, Windows, Diagnostics-Performance and click Operational and usually windows will list programs that cause Windows to take longer to boot/shutdown

Thinking about finally ditching my Plebeian 60Hz HP 2311x in favor of the Asus VG248QE, but I have a few questions. Never really educated myself on the topic, other than whats obvious, because I never figured I would make the jump. Anyway, Im well aware of the positives of 144hz panels, but...

Its a magical world we live in

Launched Arkham Asylum and the second monitor continued to work, GPU2 showed GPU usage during PhysX effects, and the PhysX overlay showed GPU

System specs in Signature Windows 10 Home 64 Build 10240 All over the internet, everyone says that if you have your secondary Nvidia GPU dedicated to PhysX, The monitors outputs wont works since the GPU is only being used for PhysX Calculations. This led me to not use the ports on said card...

Sorry in advance if this is a bit of a ramble. Recently did some computer work for a friend and he decided to pay me with a Old(ish) HP w2207 1680x1050. My Specs Windows 7 Home Premium SP1 64 Intel 4670K GTX 970 SSC (1 DVI/1 HDMI 2.0/ 3 Display Port 1.2) Main Monitor - HP 2311x 23"...

353.06 and 352.86 are casuing A LOT of TDR issues for many people. You probably see a message that says either of the following in the lower right hand corner: "nvlddmkm has stopped responding and successfully recovered" "Display Driver stopped responding and has recovered" I would suggest...