Recent content by skulish

  1. skulish

    Question Is my waterloop good?

    Tested with removed top glass - 88-93 C max on cores (except 4 and 6 they hit 96 but avg is 92-94) after 30 minutes of cinebench + furmark, but CPU is slightly undervolted now (also want to undervolt GPU). Put my hand on ot of top output fans and air from the back is much much hotter than from...
  2. skulish

    Question Is my waterloop good?

    Crosslhs82x2, no I havent checked temps without top glass. I will need to drill holes in right one anyway - there is no direct airflow to back rad and I place it near the socket so it also add its 5 cents to temps. Will check tomorrow. I was not able to find arctic fans anywhere and amazon not...
  3. skulish

    Question Is my waterloop good?

    Crosslhs82x2, yeah looks like its fans + poor air flow. Tested with 100% rpm on all fans ad ciebennch + furmark gave cpu temp avg 76-83. Looks like I eed nnew fans and "holes" onn one side of case for additioal airflow to rad on backside. I thought that this fanns in push/pull cann handle my rads :(
  4. skulish

    Question Is my waterloop good?

    Launched cinebench + furmark one more time with one side opened - GPU 49 C (-8 C, was stable for +- 10 minnutes), CPU two cores hit 95|96 (max) others 87-92, avg on all cores 89 or less. Seems like my 5ths core is preffered and take more load. Left furmark working after cinbennch finished - GPU...
  5. skulish

    Question Is my waterloop good?

    Plus one of my rads (back one) dont have nnormal airflow (poor case design :( ) I will (drill) some holes to make it better. Later will try without one glass door openned (to make better airflow in the back)
  6. skulish

    Question Is my waterloop good?

    57 deg C on GPU duringn cinbench + furmark. All fans push/pull. Radiator fans - 50% - 1100 RPM Case fanns - 45% - 852 RPM Pump - 100% - 4700 RPM Temp on GPU was also growing slowly, from 28 to 57 CPU Idle 27-30. Started only cinbench (without furmark) for 30 mins one more time. CPU temp...
  7. skulish

    Question Is my waterloop good?

    Hi folks! Jus built my first waterloop. After 30 min of Cinnebench R23 + Furmark (in parallel) cpu temps are near 100. It was not instant - it took I think about 15-20 minutes to hit 100 on one core (temps were rising from 77 without spikes). Overall 2 cores hit 100, 3 more hit 99 , others are...
  8. skulish

    Question Gunk on vertical inlet port of EK-Quantum Kinetic pump reservoir ?

    Thanks a lot everyone I will try this out. My bad, I flushed rad one more time with "normal" water - will do it with distilled next time (still need to install second rad for gpu). One more question. When I checked waterblock I decided to clean it with 95% alcohol (ethanol) -saw this in some...
  9. skulish

    Question Gunk on vertical inlet port of EK-Quantum Kinetic pump reservoir ?

    Found this pic https://www.agreatsink.com/wp-content/uploads/2020/05/Before-After-Chemical-Stain-Removal-1.jpg?ezimgfmt=ng%3Awebp%2Fngcb1%2Frs%3Adevice%2Frscb1-1 At some point it looks like what I have. Might this be caused by barrow liquid?
  10. skulish

    Question Gunk on vertical inlet port of EK-Quantum Kinetic pump reservoir ?

    All components are new. For first week (at least) I think everything was fine. But I probably just have not noticed. I will try one more time with soap but shouldnt alcohol help? There were nothing on rag after I tried last time
  11. skulish

    Question Gunk on vertical inlet port of EK-Quantum Kinetic pump reservoir ?

    Disassembled loop - this stuff seems to be only in reservour, CPU WB dont have this stuff at all. Tried to clean this tube with soap and 95% alcohol but no effect. Regarding sunlight - yeah it could but not for whole day. After I got it out it looks browny with darker parts and not as green as...
  12. skulish

    Question Gunk on vertical inlet port of EK-Quantum Kinetic pump reservoir ?

    Hi folks! I assembled my first waterloop couple of weeks ago, tested it and left it for a couple of weeks until my gpu waterblock arrives (computer was not used during this period). Right now intel tube have strange gunk on it...
  13. skulish

    [SOLVED] Custom water loop build

    Thanks for help guys! Lutfij, link helped a lot! Due soome reason skipped first item in list Crosslhs82x2, just looked at this pump, thanks! Seems like I finally decided what to order :) CPU waterblock - EK-Quantum Velocity² D-RGB - 1700 Full Nickel GPU waterblock - Bykski N-GV3090GMOC-TC-V2...
  14. skulish

    [SOLVED] Custom water loop build

    Hi folks, I am trying to build my first water loop and I need some help with components. CPU - i9-12900k GPU - gigabyte 3080 ti gaming oc 12gb Case - Thermaltake Level 20 HT For CPU waterblock I am choosing between - Corsair Hydro X Series XC7 RGB PRO and EK-Quantum Velocity D-RGB - Nickel +...
  15. skulish

    [SOLVED] i9-12900K strange core utilization ?

    I noticed one thing when I ran prime95 - 5 and 7 core clocked up to 5.2 when others were up to 5.1 (and disabling them normalizing distribuiton). There is a feature in windows + intel called favourite core...