SMS85's latest activity
-
SMS85 replied to the thread Question System issues.View: https://imgur.com/a/oCj30lA -
SMS85 replied to the thread Question System issues.Ok 👌
-
SMS85 replied to the thread Question System issues.Very hard to see tbh
-
SMS85 replied to the thread Question System issues.Done this 👍
-
SMS85 replied to the thread Question System issues.View: https://imgur.com/a/oCj30lA
-
Can you post to imgur.com as we than can jumbo size picture by opening it on imgur than right clicking picture to open on new tab. Gives...
-
SMS85 replied to the thread Question System issues.
-
I'd try to reseat the CPU in it's socket. And as stated above, inspect the socket for bent pins. Also inspect the RAM slots aswell.
-
Okay out there in left field but is there any chance a CPU pin is bent. That can and will play havoc with installing memory and PC crashing.
-
SMS85 replied to the thread Question System issues.As in on the cpu its self? That looked fine. But the cpu slot on the board not sure I’ll upload picture on here
-
SMS85 replied to the thread Question System issues.Tried it with the pro vengeance 3600mhz 1st then with the crucial 3200mhz and the same result.
-
SMS85 replied to the thread Question System issues.I done what you said to do. When booted it, it then flashed red cpu then orange dram about 3 times and now is stuck of just orange dram.
-
Power off PC. Unplug from wall. Remove coin battery on motherboard. Install a single pair of matched RAM modules into slots a2-b2...
-
SMS85 replied to the thread Question System issues.Tried this but no luck unfortunately with 16gb 2x8 in correct slots. It flashed red then orange red then orange and then just stays...
-
What model motherboard? Go into BIOS and disable XMP. Force ram to 2133mhz operation mode. Then try to boot with 2x16GB ram (or 2x8GB)...
Facebook
Twitter
Instagram