Recent content by Solferin

thanks a lot guys, hopefully Ill be soon on 4.5+ ghz and hopefully not french frying my rig in the process xD

What about Seasonic Platinum 1000, ss-1000xp, 1000 w or Thermaltake toughpower dps g 1050w? call me an idiot but im fixed on 1000w psu

for CTurbo: the 3rd intake doesnt do much, its for the gpu to get fresh air since gpu is pretty close to ground, in lets say "sealed" area. top of the case is perforated so the air has an exit, but eh ill think about 5th exhaust. thank you for the links

Those cards are pain in the a.. when you consider them in air flow scenario. They are just too big and just one oced makes alot of heat. I tried with 2 exhaust, 1 back, 1 top back above the first, but i didnt get your results. I was pulling 5 C more heat on core and socket, prolly made a vacuum...

I`ve made a hole in the bottom, so my case is kinda like standing on "chair legs" sort of, so my psu fan gets enough air and i can dust it off or vacuum it easier :) I cant put exhaust on top as you said, cause well of the space for the radiator. hmm, i might put the radiator on the side...

Found the ram - 2x corsair 8 gb ddr3 1600 mhz Case is Zalman Z9 plus, have 4 fans on it right now, one exhaust and 3 intake (2 in front and one on the bottom for the gpu, on the side and on top i have room for 4 more fans tho i dont wanna make vacuum of some sort, too much vents doing same...

As the title says, i reached stable 4.5 ghz oc a few months back, but because of the power supply i reverted it back. It was enough to know that i can do it. But the situation has changed and i got some excess money in my pocket so i want to buy a few parts to oc over 4.5 ghz. So the idea is to...

Eh running prime now small ffts, if the temp stays below 60 im good. Tho is it normall for freq to jump between 3.4 ghz and 4.0 ghz during the test? Forgot about that, its been a while since i oced this thing.

p.s. wow wod is, imo, the most demanding game i have on this rig. At this point Im not inclined to test the temps with prime or intel burn test. Right now on idle, hw monitor, core temp and speed fan says the core is around 25, socket is around 40, which is fine i think. its not as before but it...

Yep i installed the evo backplate as per instruction. I couldnt install the evo without it. Its my 4th reapplying of thermal so far and this is the first time it shortened out. Everything was fine before. Theres alot of dust here so i like to dust off my case, fans, cooler etc every 6 months or...

To make the long story short there is a cooler cpu mbo issue and i dont wanna tinker anymore before asking you guys for your opinion. Changed thermal and rig would not boot if i tight the cooler all the way in. It boots normally if the cooler isnt on, or if i thight it just a bit, but if i tight...

P.s. right now im running on high and temps are at 50, dont even think i could very high it tho passes are good at high.

So at what lvl should i run ibt? High? Very high? Extreme seems a bit extreme from what little i found on the forums for this test? And for how long?

Fpu test, not fsu lol heh still need to get a grip on terms

Ill try intel. But well the aida fail wasnt cpu related fsu ran fine. I didnt adjust ram multiplier enough. Got that fixed now, will ask you later about the ram oc. But now im again on fsu testing case i dont wanna see 1500 mhz on any test not even after an hour of test for a sec. :)