Recent content by Spacemoss

This post is older, but in case for some reason, the person is still using it, I would suggest that the not being able to start may be from the drive boot order and priority. That is almost always reset with a BIOS reset. Make sure the BIOS is pointing to the drive with your installation as one...

Came across this service named Baterci, with no description, on a machine I was working on, and had never seen it before. Can't find information about it anywhere. Anyone ever seen it, or have any idea what it does? Apparently Baterci means Torch in Czech...

It was confirmed to be the current BIOSTAR BIOS. After swapping out the motherboard with a different brand, the RAM ran at 2400 again right off the bat, and the PCI Gen 3 slots ran at gen3 speed, no problems.

I'd start by checking your power supply to make sure it's working correctly. For the components you listed there is a chance you are not providing enough power. The extra strain on your PSU may have caused it to fail. I ran your components through a PSU estimator, and it said 800-900 watts for 1...

A reason it may not recognize the BIOS files on your USB drive, could be the File Format structure of the USB drive you are using. For that board, it probably needs to be either FAT16 or FAT32 file structure. Temporarily save whatever is on your USB drive, somewhere else, and use Windows to...

Another thing to check would be to make sure you have a 12v rail plugged into the board. The connector is the 8 pin slot in the upper left of the board.

Hello, I realize that what I now have is 2 separate problems, however, they both occurred from the same short string of events, namely updating my BIOS in order to upgrade the CPU, and so I'm posting the event as 1. Most generally, it is a BIOS / Motherboard issue so I'm posting in this forum...