Recent content by spittonjr

So the problem was a bad consolidation housing for the f panel and it wasn't allowing a solid connection. By ditching the housing and doing it manually I was able to get it up and running. Thanks for helping me eliminate the other stuff! I wouldn't have gotten to that point without help.

Great to know! I'll post what I find out. Thanks for the help!

I made sure that the stand offs were installed in the right spots, but I noticed one was stripped both on the tower and internally when I went to place the screw in. Would that possibly cause a short? If so could I remove that one standoff and go without? If not, I'll try calling Gigabyte.

I've double checked that both mobo connections are in place and secured. I don't have a ups unit. I've just been plugging it directly into the wall. I've also checked the outlets to confirm that they have 110v. Would the mobo be bad since not even the cpu fan starts?

Unfortunately there isn't even any power going through after the initial flash to report an error code. I've also tried taking out a ram stick and trying each slot individually with just one stick of ram and then repeating with the second stick

I've just completed my first pc build, but it won't turn on. I've replaced the psu to a corsair tx550m and I now have my mobo (aorus z370 gaming 5) flashing all the leds when I turn on the psu switch, but nothing happens when I hit the power button on the tower and there is no beeping from the...