Recent content by srobin

I have a similar issue. I am with suddenlink and using their modem/router. My computer seems to cause this issue where my wife's computer doesn't. I had the IP replace the box, but it began doing the same thing. I am looking into virus and malware issues, but haven't found a thing, have run...

the quick access is for folders you use all the time. If you want other folders and drives to show up, highlight the drive in This PC, then right click on Quick Access and select Pin Current Folder to Quick Access.

have you checked your power configuration? Are you running any scheduled tasks? Try booting into safe mode

You can't argue with Divine Intervention

You might check to see if you are using 20mhz or 40mhz bandwidth on the 2.4. check for any interference, 2.4 can be problematic with cell phones, microwaves and other devices. as laviniuc said, move the channel to a less crowded channel. This is a good tool to see the other wifi in your area...

Radd1, Do you have a restore point? There should have been one created when you installed DFX. Boot to safe mode and search for "restore your computer". If you have a restore point, that should fix the problem.

That is frustrating. This is a driver issue (I believe). Try, Boot to Startup options and select Repair my computer, instead of Safe Mode. If that doesn't help, You can try to boot into Safe Mode, then go to the device Manager and see if there are any devices that have a problem. They...

you might find an older driver on their site that will work. I would report the issue to AMD, as they may have a solution.

I can't answer that and would suggest you consult the QNAP site. I'm assuming that the OS and applications are running on the host disk and that the Raid is for storage.

are you using all of them for Raid? If so, I would say, yes.

the 6tb is right, as Raid 5 uses parity on each disk and will reduce the space by one disk. This builds in fault tolerance

how much disk space do you have?

can you boot to Safe Mode?

as alexoiu said. Pull the cpu and reseat it, reapply paste and reinstall the fan. Also, I would reseat the memory and check all the connections.

this may help. https://support.microsoft.com/en-us/kb/2466753