Recent content by Starbucksguy

The monitor works fine, I guess it's a motherboard problem. I'll look into it and see what I can do.

I have an old desktop that I haven't used in a while, but that's it.

Yes, the manual has instructions to clear the CMOS using this jumper. I have already tried to clear the CMOS using this jumper, following the instructions; it did not help.

The VGA cable is able to connect my laptop to the monitor without fail. I don't have a computer with DVI ouput other than the one in question, so I can not determine if it works.

After CMOS reset, I removed the GPU and plugged the monitor into the motherboard ouput, both VGA and DVI. the result is the same: the monitor turns on for a second, acts as though it is about to display something, and the goes into standby with the "No Signal" message. This repeats. Edit: With...

A parts list as requested: Asus P8Z77-V LK motherboard Intel Core i7-3770 2.5 GHz Nvidia EVGA Overlclokced GTX 670 4GB 2 4GB DDR3/ 1600 MHz RAM 1TB SATA III 7200RPM 3.5" Hard Drive Asetek 510LC 120mm Watercooler Xtremegear 600 Watt 80 Plus PSU That should be the most important stuff. There's...

So, to get right into it: I have a custom built pc, originally from CyberPower but since modified. A couple months ago, the whole thing stopped working, and since I was going away for a while, I opted to let a computer repair store fix it for me. They installed a new motherboard, when I got home...