Recent content by steelystan

You were right. Setting my pump to 70% at > 30 C, 80% 30-40 C, and 100 % at < 40 C made a huge difference. I'm going to remove the smart mode and leave it at 90%. I had issues setting it static in the BIOS, thinking I couldn't get it above 50%, but it was just the way my bios displays the fan...

Gotcha. I'll make those changes tonight. I attempted to mount the radiator in front with the tubes at the bottom but my video card won't allow it. I also watched Gamers Nexus video on proper AIO installation and decided to buy a new case (I had a Corsair Air 540) and mount it on the top...

Thanks for the reply Darkbreeze, much appreciated. My radiator is on the top with the fans underneath it setup for exhaust. Below is a picture of my setup before I fixed my fans. As you can see, the front three and the radiator were setup for exhaust while my rear was intake. I've changed the...

Hi. I recently upgrade my CPU cooling to an EKWB 360 AIO. I ran 3DMark Time Spy Extreme (4k) and during the CPU test my temp spiked up from 80 C to 102 C then quickly back down to 80 C. Running standard Time Spy my CPU temp spiked up to 87 C at about the same spot on the graph. I had some...