Recent content by stefan mackey

So after further research i found out the BSOD was due to a USB 3.0 driver, deleted the driver looked more into it and also found out this is some type of security measure for not having an legitate copy of windows. so! i purchased windows 8.1 and now im good to go! thank you for your help.

Memory test out good, check all drivers, ran all windows updates, everything is good. I had a OCZSSDPX-1RVD 0120 PCI express card removed it, and all the drivers. noticed windows boots up quicker once i did that.. 3D Mark made it all the way through the benchmark finally even at extreme settings...

ill do that tonight. ill check the BIOS for the ram settings, then run a benchmark if that doesnt work ill start removing ram.

The blue screen yes. it showed a few codes.. im not sure if they are relevent though.

and also while doing a little research on the error messages i found out that 0x0000000000000006 0x0000000000000003 translates too The driver attempted to send a framework request that has already been sent to an I/O target. does this mean i may have driver conflicts? If so how do i find out...

so when i left the house this morning mamtest was going 6 hours and no errors found. but! i notice the memory timings and speed was incorrect in the sotfwear. i have DDR3 1600 corsair timings 9-9-9-24 but memtest shows it at 19-15-15-31 at 1550mhz (DDR3 3100) I did not have time to check the ram...

ok thanks ill run the memtest overnight and come back with details.

When it blue screens I receive the messages The windows driver framework has detected that a violation has occurred. Stop: 0x00000010D 0x0000000000000006 0x0000000000000003 0x0000057FE7D634D8 0xxFFFFFA0017D275F0

[/URL][/img] Good morning all, First ill start off with my specs I have a 4930K with the seidon 240, 16GB 4x4 Corsair Vebgence blue DDR1600, GA-X79-UP4, GTX780 asus, samsung 120gb SSD, ADATA 512GB SSD, PCI express SSD 120GB i forgot the exact brand i think its either OCZ or ASUS, with...

Ok, so it's not worth it? I've been researching OC'ing and it's seems everyone who has this bored uses the old style bios? It uses the UEFI interface would It make a difference to switch to legacy?

Hello all so I currently have the 990fx-UD5 motherbored it's a great MB and all but I just cannot figure out the bios and overclocking! It's so frustrating! So I did some reviewing and walked around akihabara(I'm in Japan) and found the asus formula -z V 5 AM3+ for 150$ I've read alot of reviews...

Is there a way I can display the CPU temps whole running 3D MARK? I have WM but I cannot view it while 3D mark is in full screen. Or can I?

I also have 4 cooler master 120mm fans in a push pull configuration, 2 80mm cooler master fans, and one big 200mm cooler master fan all hooked up to a max 60w fan controller.

Ah! Apologies lol FX8350 stock clocked with Seidon 240 watercooler

Good morning all, So here's my issue whenever I run the latest versio of 3D mark demo test my computer will shoot through everything till the last fight scene sequence then it just reboots, I get no error messages, strange system beeps. Nothing. The settings for 3D mark are all at default I...