Recent content by stenlly6236

NO, No you didn't offend me in any way, but this Idea of mine has a hole in it. The USB provides only 5 Straight volts. The fan is rated for 12V, so I want to increase the voltage so that the fan is consuming 12V from a USB which provides 5V.

I already have a pad but it's crap and I even tried your idea once with no result (maybe because the pad is shit). And if you say: Why don't you just buy a new one? Well I am a university student that tries to save a little money for other stuff and besides I already have a fan and usb cable...

Hi everyone! So here is the deal. My laptop is overheating even after a clean up and fresh thermal paste. So i have an idea. I want to glue a fan to the vent hole from which he is drawing air and hook it up to a USB port via a USB cable. But I know that the 5V from the USB won't be enouth to...

It worked. I used a USB with Windows 10 to first format the drive and then I installed a fresh OS. Everything is fine - the drive is detected and tere aren't any crashesh. THANK YOU.

I don't have another sata cable. Can I just format the disk with a windows 10 USB burn drive and install a fresh OS? Also I can't clone her HDD right now 'cause my SSD is 120GB and her HDD is 640GB. I was just trying to see why it didn't want to detect the SSD, because if I recommend her to buy...

There are no Secure boot nor CSMIf you like I can tel you what I have in the bios

Toshiba Satellite C855-1TU is the laptop, and the ssd is Adata SU650 120GB

So basically I was fixing my cousin's laptop. She said that it started to run slow and I thought that the HDD has hit it's age and I had one SSD with windows 10 on it so I put it in. Immediately popped a message that there wasn't any storage inside. I tried to change the BIOS settings from AHCI...

Hi guys! After 6 months of owning my new gaming PC I found something disturbing. My MB is a b250m from AsRock and my RAM is 8gb 2400Mhz. So I knew that my MB supports 2400Mhz RAM with 7th gen CPU. Can you tell me if I can upgrade to higher frequency RAM and can I support it. In my BIOS doesn't...

My thread is not so much of a thread as it's a question. Basically i have a GTX 1060 6GB and when I started overclocking it I found that my base Memory Clock Speed is 4007Mhz, but on the manufacturers website shows that it's Clock Speed is 8007Mhz. Should I be concerned about this?

I called them again for the second time and they sayed that the problem is solved. But the graph in speedtest looks like a hearth monitor in a hospital.

It's in both. Games are impossible to play with this connection. Also if I try to watch any video outside YouTube it's a nightmare. I have to lower the quality of it to at least 480p to watch it "normaly". The games that I play are: CSGO, Blade & Soul, StarCraft 2, PAYDAY 2 and some more. But...