Recent content by Sublime02

bump.

Got some used parts recently including an asus mobo that looks like it was never used. Came with a cpu, psu, and ram. Turn it on, no post, solid red light comes on by the rog_connect switch, if i hit the 'go button' the Dram_LED light starts blinking. I swapped in a known working cpu, gpu...

Yea there are definitely a few that are bent, on each mobo. utubed some vids, will try and bend them back later today. Thanks!

Have a gateway fx-6800-01e been trying to fix. specs here. have 2 mobos, 1cpu. working psu, gpu, & ram from current rig used for testing. When powered on bare bones, pc has long constant beep w/ no post. when the cpu isn't locked in place by the latching system, the pc turns on with no...

First of all, very new to wifi and thank you for your help. We want to get a wireless router to share between our two homes. They are close together, ~15' between. Roughly about 50ft between the router location and our pc's. We only have one gaming computer and several pc's just for...

Yea, i tried booting comp w.o gpu's installed. No fan's kick on or anything. I tested on another x58 mobo i had a cmos error on *but would at least attempt to boot* and didn't do anything but the led light on the mobo. which pulsed seemingly showing a fluctuation of current to the mobo (both...

PSU is a thermaltake 750w w0116. about 3 on each board were bent. Seem relatively straight now. Cannot confirm if the pins might have touched.

Yea I saw that part and of course I bent the pins back. From what I understand the system fans should at least still boot up even without solid connections on the pins, right? Is there a way to determine if the psu is safe to test on another known working system. I'm close to just upgrading...

Re-applied thermal paste the other day to the GPU's and CPU after blowing air through the case. Now it wont start. No fans. Just a flickering LED on the MoBo. Already went through the sticky steps. Disconnected everything from mobo. Same result. Tried differen't mobo, same result. Tried...