Recent content by svendor

  1. S

    reboot and select proper boot device or insert boot media in selected boot device and press a key

    I tried formatting my USB flash drive and then put windows on it again. It worked this time. Probably shouldn't have just removed the files and put in the OS installation :/
  2. S

    reboot and select proper boot device or insert boot media in selected boot device and press a key

    I found this: Legacy USB support: enabled. It didn't work because it was already enabled :(
  3. S

    reboot and select proper boot device or insert boot media in selected boot device and press a key

    I don't kow wether i've seen one or not, but my keyboard works fine. I have seen anoption in BIOS where i can select either UEFI/LEGACY or both at the same time Both the USB and the keyboard are hooked up to the motherboard.
  4. S

    reboot and select proper boot device or insert boot media in selected boot device and press a key

    I recently built my computer, but I can't seem to boot my USB flash drive with windows 7. I gave it highest priority on my boot order, both the EUFI prefix and not. After a little while I can't even see my SSD and HDD in the boot prioty list anymore. My hardware is listed in the link below...
  5. S

    please power down and connect the pcie power cable for this graphics card

    I am only using one of the connectors, should I use two at the same time? Edit: I tried using either the 6 pin and the 8 pin connector, never both at the same time. Edit 2: I used both at the same time, I no longer get the error message!
  6. S

    please power down and connect the pcie power cable for this graphics card

    That all is in the tweakers list, but I'm using the: Gigabyte GV-N970G1 GAMING-4GD Corsair RM 750 Gigabyte GA-Z97X-Gaming 5
  7. S

    please power down and connect the pcie power cable for this graphics card

    I just finished building my pc. Unfortunatly, every single time I lauch my pc (http://tweakers.net/gallery/657262#tab:wenslijst) I get the error message: "please power down and connect the PCIe power cable(s) for this graphics card" And I get no response on my monitor at all when I use the...