Recent content by TemporarySoil

After trying to reseat everything I managed to get the PC to post with the new CPU and both sticks. I'm not sure what caused this? Maybe a bad mount? Anyway, thank you for your help.

The pins don't look bent to me, but I could be wrong. View: https://imgur.com/a/Fgy4abA Here, hope the link works.

I tried re-seating the memory and checking that everything is plugged and something weird happened. I got it to post with only one ram seated on the fourth slot (when it worked with both on 2nd and 4th slot earlier today with the previous CPU). I tried swapping both rams and both work but only...

Hello, I changed my build's CPU, and only the CPU but now my PC won't post anymore. I have debug LEDs on my motherboard. At first they go red->orange->red->stays orange for more than 30 minutes. I initially thought it was going through memory training, but it shouldn't take that long. My CPU is...

Update: I got a replacement for the motherboard (same model) and my graphics card is now detected! Turns out the PCIe slots were indeed faulty. Thank you for your help everyone!

Yes, I tried reseating the cables. I have two sets of cable for the GPU. I tried both but I still couldn't get a display from the graphics card. I have a GTX 1650 that does not require any cables (my mistake, earlier in the thread I was worried about the cables and the PSU, but turn out I don't...

I'm not sure how to disable the IGD and force a boot with the RTX/discrete graphics card. In the BIOS, I go to Settings-> Advanced->Integrated Graphics Configuration and I have a line named "Initiate Graphic Adapter". I can choose either IGD or PEG. I tried both modes and the LEDs behave in the...

Update: So I tried the GTX 1650 in the MSI MAG Z790 Motherboard and I still don't get any display. I tried both monitors and both PCIe slots. I replaced the GTX 1650 in my old PC and it works perfectly, so that means that the motherboard's slots are defective. I'll have to return it and...

They aren't any once the PC is booted. When it boots up, it lights red -> orange -> white, and then they shut down and the PC boots.

I do have just enough clearance for the bottom slot (I have to remove the bottom fans). I tried the RTX there and still no display but the lights turn on and the fans spin. As for the motherboard I set the graphics to PEG so that it uses the graphics card. Other option is IGP and it's for the...

Okay, I'll try the GTX in the new motherboard then. Yes, I did plug my video cable in the graphics card (I have two monitors, one connects with HDMI, the other one has HDMI and DP). I tried the HDMI port with both monitors and all 3 DP ports. I couldn't get anything to display on screen. I...

The latest I could find on MSI's website. It's from June 26th so roughly a month old. I don't know anyone with a PC in which I can install this GPU, unfortunately. However, I have a GTX 1650 from my old computer. Is it possible to mount it on the new motherboard? Also, isn't my PSU too powerful...

Hello everyone, I recently finished my first build. Everything works great except for the GPU, a ZOTAC 4070 Super Trinity Black that is not detected. The card itself turns on and the fans are spinning, however it doesn't show up in the BIOS, nor in the device manager. Only the integrated...