Recent content by TheCoachChen

People on YouTube have reached 100% GPU usage. MSI recommends that I should RMA the cards. Also my temps are amazing for SLI..... all below 55 C. This is not solved yet..... please untick, I clicked the Gmail link and then it ticked itself for some reason.

Yes I did check that SLI was enabled. That's how I turned on one or two cards. Lastly Temps are golden. Around 50 C when gaming for the 970s. For the CPU it's around 45 C load while gaming.

PC Specs are CPU Intel i7 4790k @Stock cooled with Corsair H105 Push Pull Silverstone FM121 fans. GPU 2X Nvidia GTX 970 MSI Gaming Edition. PSU 1300 W EVGA Super Nova 80 Plus Gold. 1st HDD Kingston 240 GB SSD Now SATA III. 2nd HDD WD Blue 1 TB 64 MB Cache 7200 RPM. 3rd HDD WD Blue 500 GB 16 MB...

I had the same system, except I had SLI 970s. I think your i5 4690k might be the bottleneck, it was for me. I gained over 20 fps going from the i5 to the i7 4790k. On a side note, I got the achievement that my CPU was bottlenecking my GPU in Steam 3d Mark. I have the same problems too though...

Any sub $100 graphics card can max out at 1280X720 or 1440X900. If that's the case then I'd recommend the 8350 if you are gaming at that resolution. I recommend this to save money if you are gaming at these resolutions...

So where would QPT/VPI be on my motherboard??

1. I want this system to be future proof for at least 4-5 years. Goes to the i7, beats 8350 in every benchmark. 8350 is good enough now, but i7 beats 8350 and will be a good processor for years to come. 2. I will be playing every latest upcoming title like AC4 etc. Toss up, depends more on...

Yes It is. Windows 8 Pro is my OS.

0x101 = increase vcore 0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is on i7 45nm, usually means too little VVT/QPI for the speed of Uncore on i7 32nm SB, usually means too little vCore 0x0A = unstable RAM/IMC, increase QPI first, if...

I know where Vcore is, Uncore voltage and VCCIN is but what are the rest. Here are the codes: I am overclocking the 4670k and keep getting 0x124 error code. I don't know where the QPI/VTT setting is on my MSI Z87-G45 motherboard. 0x101 = increase vcore 0x124 = increase/decrease QPI/VTT first...

I rolled with the GTX 780 mainly because it was cheaper to run in the long term (power bills). Also there is tech that is newer and better just around the corner. I also didn't want to deal with the heat added from SLI. But if I want to deal with that stuff, I could get a second 780, have a boss...

Well I did spend the money on the 144 hz monitor.