Recent content by themanwithaplan

Update: Huge thanks, I flipped the fans as you suggested and retested both cpu and GPU temps by running Kombustor and AIDA FPU only together for one hour and the core temps never went past 77C, mostly they hovered around 69-72 for the last 30 minutes of the test. , GPU never went past 70C...

So you’re totally right, that case pictured in your post is what mine looks like except I have one intake fan instead of three. And the second thing I should mention is that I have the radiator mounted tubes down since that was EK’s “recommended” config in their manual, would that also possibly...

Just noticed I never listed my actual temps: please note my cpu is running at 4.8 with avx offset of 2 and my GPU is at 113% power limit and +120 core. So first I’ll list the temps I get in unrealistic loads (side panel is on): MSI Kombustor + AIDA64 FPU only (4.6ghz CPU~82 Max GPU ~71-72...

First off, thanks for the very helpful posts: So I have replaced the thermal paste on the cooler already because that’s the first thing that came to mind when I saw the temps I was getting (the AIO came with pre-applied paste) in hindsight that was probably not needed but replacing the paste...

Deepcool Gamaxx GTE

Specs: 10600k w/EK240MM AIO Rosewill PRISM S ATX case RTX 3070 EVGA XC3 So I'll get right to it: I have my AIO mounted to the side of my case with the logo side of the fans facing towards the glass side panel. In addition to the two fans on the radiator, I also have one exhaust fan near the...