Recent content by TJSchettler

  1. T

    [SOLVED] Brand new computer build fails to boot windows (or even run MemTest86) during install.

    I got the new fan today and installed it. I understand that the smaller fan was definitely an issue to tend to, but it did not fix the constant reboot issue. I tried to ReFlash my BIOS multiple times, but the system performance hasn't changed. The computer still gets as far as fully unloading...
  2. T

    [SOLVED] Brand new computer build fails to boot windows (or even run MemTest86) during install.

    I see. Well I will have to try reflashing the BIOS since the issue has taken place without the 1050 Ti installed (I've unplugged pretty much everything not critical to startup). I did try flashing the BIOS once already, but it didn't change anything. However, it is possible that I did not...
  3. T

    [SOLVED] Brand new computer build fails to boot windows (or even run MemTest86) during install.

    Thank you for the suggestions! Just looking at those fans makes me realize how small the fan I got actually is. Going off memory right now, the numbers that I can remember it reading were between 38 and 41 (deg C I think?). I will edit this reply as soon as I can upload a photo of the BIOS...
  4. T

    [SOLVED] Brand new computer build fails to boot windows (or even run MemTest86) during install.

    Thank you for your advice! That's something that I hadn't come across yet, so I didn't even think about it. However, the BIOS doesn't show that the CPU is overheating either, so that may have been the cause of my ignorance as well. My apologies about leaving out the BIOS! I currently have the...
  5. T

    [SOLVED] Brand new computer build fails to boot windows (or even run MemTest86) during install.

    Specs: i7-9700k MSI MPG Z390 Gaming Plus Corsair Vengeance LPX 16 GB Samsung 870 QVO 1TB A pair of old HDDs that haven't been plugged in Windows 10 Home AresGame AGK750 Modular PSU Geforce GTX 1050 TI (MSI Nvidia model and is the one thing that I know works since I had it in my previous "build")...