Recent content by ToxicMoofin

Did the DDU, reinstalled fresh drivers and no solve, it still triggers a reset and a message on screen about input timing. Every setting is set to 60hz, one of them winds of being 59.-something for some reason with 60hz as an option, but swapping doesn't do anything and the setting resets after...

Will try, will I need to temporarily swap to my internal GPU while I have no driver or will it work like normal? And yeh, I tried with both a different monitor and a different cable, same results unfortunately.

Sorry it took so long to check lol, I'm on graveyard time so I may get back to you later. My bios does list voltages for everything but my GPU, and nothing is red. CPU and motherboard are holding at a solid temp. The only thing that might be odd is it lists 3.3v voltage and next to it it says...

From what I've seen my voltages were ok, or at the very least I didn't see anything red in all the blue lol. I'll have to check to be sure though. Aside from these I've got a 2tb hard drive, and a USB hub.

It full boots, n I can use it normally, browse Amazon or use yourube. I just cant play any games on it. It ran games fine last night but I updated the bios and pulled some burnt out LEDS from the case since then. I doubt the leds had any kind of control over the input

Motherboard: Asus 170-pro bios version 3805 CPU: Intel Core i5-6402p 2.80GHz GPU: Nvidia GTX 960 4gb RAM: 32gb of 3x PNY 8gb sticks (1066MHz) and 1x A-Data 8gb sticks (1200MHz) Monitor I'm using is a dell E2014H 1600x900 monitor that supports up to 60Hz.

So, I recently got this computer from a friend that said they couldn't get it running. I get it together and it's running great, but I noticed that I can't update to Windows 11 due to the bios needing updates to use tpm2.0 (later found out my CPU isn't good enough either) so I updated it, PC...

@ At this point theres no safe mode to boot too, but even if there were the loop takes place just before im able to bring up any kind of BIOs options. I managed to get into the bios menu once after the loop started to see if a factory reset would help. It didnt... As far as i can tell...

Not a single prson has run into this problem?

I dont see why not. If your switching from a micro tower/micro moba to a full size tower there might be some alignment problems with all the sockets in the back.

So yea... Went to do a factory reset on my W10 pc. It got about 30% through, reset... And now here i am... Ittle It will show the HP logo and speed past all the bios/system stuff, then just reset abruptly. I tried turning it off and back on, and it started to turn itself on and off for a few...

Same isse exactly but my contect is working fine. Its likely my Blu-ray data cable, i accidentally snapped off one of the plastic pins that helps keep it in the socket, ive got electrical tape holding it in atm lmao. Tha k you for the response, it was really helpful lol

Hello, so i take my system appart every few months just to clean the dust out and re-apply paste to the CPU and heat sink; well one time while doing this i did something to break/disable the eject button and i have no idea what it could be. Its not important to have or anything due to the...

Thank you for replying, While Id like to play with a face cam, i stream via PS4 so adding a software to hide/replace my face would be difficult (to my knowledge); as for the page changing, i looked in to that about a month ago, and you cannot customise the page as throughly, mostly the images...

So ive been streaming for a year or two but my views and followers havent really gone up. Ive been brain storming and asking the people who DO watch as I stream but no real definitive answer Am I doing something wrong while streaming or is it something else? You can watch Here if you want to...