Recent content by Tralebus

I was able to get and test an 8350 along with a gigabyte board for about a week. The cpu/mobo combo came overclocked (4.8ghz) from the store of a friend and i was able to test it in several things. While there was a minor boost in some heavily multithreaded applications, i can say that overall...

Thanks for the quick feedback people! A core i7 920 at 2.6ghz has about the same single core performance as a 4.0ghz fx 8350 from benchmarks that i've seen. Saying that my 920 is at 4.4ghz, how much of an overclock are we talking about for the fx in order to reach same single core performance...

Hello, im thinking about upgrading my trusty i7 920 to an FX processor. And i plan on overclocking that fx as high as it could go, probably anywhere from 4.6 to 5.2ghz depending on the chip's OC capabilities. Im currently running a 4.4ghz i7 920, would it be much of an upgrade? Is it worth it...

Ok so last week i removed the battery and reset it completely, put it back on and reloaded by OC settings and everything worked without double post. Right now (After a week) im facing the exact same problem, LOL! Double post is back. What is going on? I tried resitting rams, replugging...

Ok how does the memory backup work? What would i have to do? I just disabled "memory recheck" in bios, though i have no idea what was it for, lol but i thought it could be it. Also my modules are running at normal settings 8-8-8-24 so they are ok in that department. ingtar33@ Any suggestions...

My PC started powering off once or twice - before post - every time i turn it on -in short: it restarts with a cold powerdown and power on and goes up until before post, then it does it again and the third time around it just turns on normally-. It all started when i unplugged the PC and then...

Hello, i own an Asus M2N motherboard and my current CPU is athlon 64x2 6000+ (3.01gh) and i feel like it is time for an upgrade. I cannot afford a whole new socket right now, so i would like to know which is the best possible CPU that my M2N motherboard can take? This is the exact model in...

It looks like when i use just 1 dimm i can run prime 95 just fine for at least 15 minutes before i get an error on a single thread out of the 8, and that's with all the default settings. Im now trying the 1 dimm with 1.64v and 1066mhz which was my most stable setting in the dual ram setup. It is...