Recent content by tristansummers

You would probably need to get a bespoke driver. I did that once to use an esata pcie card for optical drives. Far better to use pcie riser card from the existing 16x slots and enable bifurcation in bios

It looks like the manual is wrong and the motherboard actually has standard GPU, VGA PCIE connectors, so I can use the GPU connectors. So I can run two GPUs and connect an 8 and two 6 connectors with an extension cable or two. Would prefer some confirmation before I blow anything up. This board...

So. You just need a third 8 pin gpu pcie cable going into the motherboard and maybe two more 6pin GPU pcie cables plugged into the motherboard. I think that, because the cpu is 280w, it's taking power that normally helps the pcie slots. So you need the extra 8 pin pcie. Unfortunately the...

Have you plugged in the extra 8 pin and 6 pin Pcie power cables into the motherboard? If not it won't have enough power for two 3090 so it's probably that? Update the bios just in case.

SO i need to reroute the 12v and ground pins. Not sure what to Google to find adaptor cable. PSU is not modular. It's supermicro cse747 case with two hot swappable 1600W psus. I don't really want to damage the 4 GPU cables.

Gpu pins WRX80E-SAGE pins

My PSU has 4 GPU connector cables. Each has an 8 and 6 pin connector. They are hard wired into the supermicro board for the removable PSU. My Motherboard has an 8 pin and two 6 pin connectors but they are different to GPU (PEG?). The square shapes are different. Is there a connector cable I can...

Hi I have a z820 with a 2 x 512 GB Samsung 840 Pro RAID 0. If I try to render a 30min 1080p Uncompressed Quicktime it KILLS the SSD RAID and I have to delete the volume, reconstruct 2 simple volumes, run Samsung Magician and rebuild the RAID. When I say kill, I mean it goes from over 900Mb/s...