hmmm its not adjusting speed, i may reconnect the fanmate to move it around,
is it an issue if its on full blaste all the time, its not that noisy tbh, and over summer if it keeps it at these nice temps im kl lol
Ok i took out the dust, reapplied the paste, reassembled not its good, between 40 degrees to 60 on load which is fine. Also i took out the fanmate2 dial and let the MOBO control the fan speed.
With an ASUS mobo im using Qfan, but it seems the cpu fan is on full blast, so i dnt know if what i...
iv tried multi programs, and the bios temps are same, im ganna go in and chekout the heatsink en stuff, clean and reapply paste, reseat heat sink and see what happens,
reckon i shud the pc 10 mins or so to let indsides cool down a bit?
is this zalman one just crap, i cant have a high heatsink fan as the case is quite narrow, i can fit the stock one in....maby i should go with that instead?
or clean then reapply paste?
no no overclocking what so ever lol, 62 max, :S its always over pretty much, has been for 3 months or so, was find over winter lol, cold weather kept temps low i guess
Ok, im having some issues with my AMD x4 955 BE, the temps range between 60 to 80 under load. Iv tested the temp under 3-4 diff programs and its showing the same results.
The Zalman VF2000 LED is my cpu cooler, and i have alot of HQ fans in the cas, two intakes at the front, two at the back, i...
cheers guys, ill probz hang on a bit more, its as copamundial said, just a bit of an itch really lol,
while looking for upgrades however it seems most places dont sell AMD2+ processors any more so any upgrade would mean replacing the mobo as well, may as well go the whole hog and renew if...
thanks for the reply's :)
round 2 years now
i like to jump on to the next ship a bit before the PC become next to worthless on ebay
twin monitors 1080p
500w psu
case: http://www.silverstonetek.com/products/p_contents.php?pno=SG04-F&area=usa (M-ATX)
------
i use it for video editing, alot of...
Currently running a Phoneme 955 x4 Amd2+ on a m3n78-em , 8gb ddr2, and a Ati 5700,
i been looking into these sandybridge components etc, would i get a significant performance boost? or would it be good to wait until the next range whatever they may be :D,
been away from the hardware scene...