Recent content by vedosan

Thanks guys, turns out the problem was the RAM. I put 2x hyperx fury DDR4 2400Mhz (HX424C15FB/4) and everything worked fine

My thought process is the PSU is new, it should work even for a month. But ok I will try with the other one

Alright, thanks. Will definitely try with the PSU change

Well the thing is as I mentioned earlier, I removed the GPU since I wanted to fix the booting problem first. Afraid that the GPU might get damaged from all the rebooting. Hence I do not get any display

I'm not sure it gets to the bios. But seing it runs for ~30s I suppose it does?

I see, I will try that as well. Although, it kind of pains me since it was relatively expensive here.

I agree, but do you think that is actually the issue? What do you think about the RAM thing?

bump. Still haven't found a solution

The only thing I haven't tried is CMOS reset. Not sure if it will work though

Thanks, I will check the link out. I tried what you suggested as well, still the same issue. I didn't get any output on the monitor so I left the gpu out

Hi guys, I recently got all components I ordered for building my first PC. When I connected everything and pressed the power button, PC turns on and stays that way for about 30 seconds and then reboots. And continues along the same pattern. I tried everything suggested in the sticky in this...

Yes but since I've never built one, not sure if there's a margin of error. Basically, just being 100% certain

I just received Cooler Master - Hyper 212 LED Turbo cooler (which is 163mm H), and found the Cooler Maser MasterBox TD500L case (which can fit a max of 165mm H). Do you think that this cooler will fit the case? Worried that 2mm might make a difference. Also, if there is an aesthetic part of...

I see. Thanks for that, then I will look into buying 2x8 GB as soon as possible

Thanks for the tips, I was planning on buying one more 8GB stick, a month later. Is that a good plan?