Victel's latest activity
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.Yes four 24gb sticks they didn't sell a lot of 4 at that speed. Is that bad for them?
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.To run my ram at 6000MHz You're suggesting I set the voltage at 1.4v? Which setting would this be specifically to adjust this voltage or...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I set my RAM frequency to 6000MHz and my PC is currently running on that. Is there another step?
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.DRAM CAS# LATENCY says 40 CHA and 40 CHB DRAM RAS# to cas# Delay Read 39 CHA and 39 CHB DRAM RAS# to CAS# Delay Write 39 CHA and 39 CHB...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I responded above. I forgot to hit reply. I'll note I was able to get my ram speed to 6000MHz
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.Primary Timings DRAM CAS# Latency, DRAM RAS# to CAS# Delay Read CAS# Delay Write are the top settings. Secondary timing listings are...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I don't see TLC listed. There's a million settings, twrpre, trdpden, tcpded, tccd_l_tdllk. Xmp is enabled on easy mode, not in AI...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I don't see the CAS latency listing you're talking about. There's a section on the right in the timing control called CPU/Memory but I...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.When I adjusted the speed xmp reverted to off in BIOS. I think it's listed as 4800mhz.
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.It doesn't like when I set the ram to 6000mhz either. Looking at the compatibility for z890 pro art it looks to support four 24gb ram...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I can reach the bios with xmp being on but only after I force shutdown the PC and it goes into recovery mode because I can't get it to...
-
VVictel replied to the thread Question Enabling XMP causes a black screen ?.I ran your tests. They say nothing is wrong.
-
V.SKILL Trident Z5 RGB Series (Intel XMP 3.0) DDR5 RAM 48GB (2x24GB) 8400MT/s CL40-52-52-134 1.40V x2 ASUS z890 pro art Windows 11 4090...
-
VVictel replied to the thread [SOLVED] Windows install media can't detect drive.The microcenter tech support was able to help me. They directed me to download from...
-
VVictel replied to the thread [SOLVED] Windows install media can't detect drive.Yes I reset my bios settings to default. None of the INF files show up unless i select to have incompatible drivers display. Pressing...
Facebook
Twitter
Instagram