Recent content by vjose711

There was a pin a little bent on my cpu, i'm going to wait on a friend with a better delicated hand control than mine, hope i did find my problem

I'm running the latest bios at my mb m5a78-m usb3 (2101 version) And all my ram works properly at A1-B1, the problem is with the secondary dual channel, it even shows dual channel off at CpuID Gonna check the Mb now

I don't think my motherboard supports memory profile settings. I got two packs of two rams, i used my hyperX ones at A2 B2 as you asked and followed the steps you told me, but my computer didin't even starts to bios, only a black screen as if there was no memory at all, but when i look through...

Ok, so my motherboard is an m5a78-m/usb3 with an FX - 8300, i was told to set to more relaxing RAM timings to solve this issue: https://forums.tomshardware.com/threads/well-i-have-been-through-some-trouble-with-my-ram-it-says-7-98gb-usable-from-16gb.3492739/ but i have no idea what to do when...

need it to try to fix an arror

Lemme see if i get that, the ram could be working together since always, and with a cpu change it just stops? I'm kinda of a casual or /and curious when it comes to overcloacking, sorry for being such a newbie, these are my actual dram configs, i don't know if you could guide me about what to do...

There's 2 Kingston Hyper X 1600mhz 4gb DDR3 and 2 G.Skill with the same specs, But i'm kinda of sure there's no problem with any ram module since they all work normaly if i put them on the first 2 slots of the mb

I'm getting some trouble at unleashing my full RAM after a change of CPU, already tryed going back to old CPU testing and problem still going on. Well in the PC bios it only shows 8gb RAM installed, but at control pannel i get 7,98 usable from 16GB. Already tryed eraser on the ram pin...